John Deere

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Mower deck gauge wheels should be properly adjusted to prevent scalping grass on uneven terrain. The bottom of the wheels should sit approximately 1/8-1/2 of an inch from the ground, depending on your cutting height.
While there are several reasons this might happen, it is most commonly the result of an uneven deck or misaligned blades. Make sure the blades are facing the correct direction and are not warped. Check the mower spindle and repair it if necessary. Check if the deck is level and if not repair or replace it.
Mower decks often have an enamel paint coating that helps prevent grass clippings from sticking. But over time, this paint can wear out. You can refresh the coating with other lubricants, like non-stick cooking spray, or use a lawn mower paint available at your local hardware or home improvement store.
Grass clippings building up more than usual under your mower deck may be caused by moisture in the grass when you cut it. Wetness causes the grass to clump, making it more likely to stick to the underside of the deck.
It is an excellent lawn mower cleaner. A simple spray of WD-40, like a lawnmower cleaner on the blades and the housing, will keep the grass from sticking to it. It will also keep the housing and blades free from rust.
Based on that usage, a lower-quality line of residential mowers is expected to last 450-500 hours, while a John Deere residential lawn mower will last around 1,000-1,500 hours.
Why doesn`t my lawn tractor discharge grass properly? The underlying cause for improper grass discharge is lack of airflow through the deck. WET GRASS: Wet grass is heavy and the available air flow from a properly functioning mower is not sufficient to throw the wet clippings out of the deck.
For most effective results, a lawn mower deck should have a pitch of 1/8-inch to 1/2-inch between the height of the deck rear to the height of the deck front.
To prevent grass buildup from sticking to your mower, spray the deck with non-stick cooking spray, silicone lubricant, or a rust protectant. Mow regularly at high throttle when your grass is dry to reduce buildup. Switch to high-lift blades if your mower is compatible.
A power wash system with the right pressure levels can make the job of cleaning land mowers easy and effortless, as it can remove grass build-up and other debris underneath the mower deck. Cleaning the deck after mowing will enable the mower to perform with greater efficiency.
Two main factors that influence grass to grow in clumps are moisture and soil conditions. If your lawn is irrigated more frequently than the soil can absorb, you`ll start to notice that grass grows in clumps. Another reason that grass might be growing in clumps is because of the type of soil you have.
Cooking oil

Whether it`s olive, canola, or vegetable oil, its uses can extend past the kitchen as a cheap WD-40 alternative. The greasy texture of cooking oil makes it a great lubricant, and it`s a good multipurpose oil, too.

How Many Hours Should A Riding Mower Last? Most riding mowers last between 500-700 hours, although some can run for as much as 1,000 hours if cared for and maintained properly.
However, other aspects of the machine, like the transmission, clutches, hydraulics, and more may need to be replaced to keep the tractor in good running order. A general rule of thumb is that 2,000 to 2,500 hours is well broken-in while anything above 35,000 hours is considered high.
As a rough rule of thumb, a single-cylinder mower with 500-750 hours would be considered a high miler, but that`s not to say it`s all worn out. A well-maintained mower will go on and on, as said earlier, my own ride-on mower has about 1000 hours and still pulls its weight around here.
Heavy mowers will start to sink into the grass and whip up moisture as they cut your grass, which causes grass to clump in matted wet wads that clog the deck of your mower and its catcher.
If you find that your lawnmower keeps dying, or keeps stalling while cutting grass, then inspect the spark plugs. Look for signs of damage or wear. Something as simple as a cracked porcelain insulator can mean an electrode has been damaged or burned away.
What Are Reasons Why Your Mower Leaves Grass Trail Behind? The reason why your mower leaves grass trail behind, is that there is are some mowing errors, or it has poor mower blades, or bent ones. This would also be due to improper mowing practices, using the wrong blade size, or it has a jammed deck.
For a healthy, beautiful lawn, it`s important to mow properly. That means mowing before rain, so that the clippings can act as a mulch to protect the soil; and after rain, so that the blades are less likely to tear. It also means avoiding scalping, which can damage the grass and leave it vulnerable to disease.
It`s best to wait for wet grass to dry before mowing. Wet grass clippings can clog your mower, causing it to choke and spit out clumps of wet grass that could smother and kill your lawn if left unraked. It`s best to wait for wet grass to dry before mowing.
This can happen when the mower has been left outside during heavy rains. Moisture can prevent the spark from going off, so you may need to check the spark plug and clean it from any moisture or condensation. Clean and dry the spark plug thoroughly and use a little sandpaper to get rid of any residue if necessary.
If you hear strange noises coming from your mower deck, it may be a sign that the spindle is damaged. A bad spindle can produce grinding, rattling, or squeaking sounds, which indicate that the bearings are worn out or the spindle is bent.
For most effective results, a lawn mower deck should have a pitch, or height difference of 1/8-inch to 1/2-inch between the front of the deck to the back of the deck. Naturally, this makes the sweet spot about 1/4-inch of pitch, depending on the mower model.
Just as stronger is better, deeper is duly so. “With the deepest deck and highest lift blade, the mower should do a tremendous job vacuuming and bagging,” Tegtmeier noted.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

My john deere z425 start fine but does not move
ANSWER : Check drive pulleys and belts.

Read Full Q/A … : John Deere

I have vibration in the deck and have checked for a warped deck, busted spindles, and bent blades
ANSWER : Depending on the machine?? check or replace the cutter belt and also check the v pulleys for alignment

Read Full Q/A … : John Deere

L110 bagger installation
ANSWER : I can’t help you on the bagger hole location. But you will need quality hi-lift blades. “Gator-Blades” are some of the best. At www.mowpart.com or Amazon.com

Read Full Q/A … : John Deere

What size – Length belt fits L110 – John Deere L100 Series
ANSWER : Model # GX20072 is for a 42 inch deck . It fits a variety of John deere mowers

Read Full Q/A … : John Deere

How do i replace a clutch on a JD 3020 tractor
ANSWER : Break it in half, then get with it.

Read Full Q/A … : John Deere

Looking for information on a John Deere tractor S/N CH0850S017329 and the current estimated value of this tractor with approximately 2,700 hours on it.
ANSWER : Can you please post the model number of the tractor? Thanks

Read Full Q/A … : John Deere

Where is the battery located on a john deere RX73 riding lawn mower?
ANSWER : These mowers did not have electric start, therefore no battery

Read Full Q/A … : John Deere

Which way do i install thermatate in john deere 4020
ANSWER : Looking at stat top part looks like a handle around it

Read Full Q/A … : John Deere