Garden
Experienced gardeners share their insights in answering this question :
Don, there is usually a spring loaded tensioner to do this, the belt may be stretched and needs replaced, or some pulleys actually are now wear items and may need replaced. Check the video links below, some models are adjustable.
“I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info.”
Mower belt tensioner repair question to the Garage Gang
http://support.mtdproducts.com/app/answers/detail/a_id/563/~/deck-drive-belt-tension-adjustment—riding-mower-(step-thru)
Tightening the belt on John Deere L110 Tractor
Mowing Deck Belt Replacement On Husqvarna LR12 Lawn Tractor
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
If the belt was too slack, increase the tension by levering the pump outwards with a strong screwdriver or flat bar. Lever against the cast front end of the pump body, just behind the drive-belt pulley — not against any other part of the body or pipework, which are easily damaged.
If the belt is too tight, it will cause excessive side loads and overheat the bearings. This in turn causes noise, decreased output and even the seizing of the alternator. If the belt is too loose, it will cause the alternator to slip. This slipping can cause the alternator and the battery to work harder.
An over-tightened belt can burn out any bearing that the belt rotates on, including alternator, power steering pump, A/C compressor, idler pulleys, etc. An over-tightened timing belt can ruin any pulley bearing it is connected with.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
Trying to tighten a belt on riding craftsman lawn mower –
ANSWER : Most are tensioned with a spring only make sure they are all there.
Belt is too loose
ANSWER : Unfortuationly not on this model.It will prob need to be replaced.
Drive belt Have replace drive belt but mower still has no forward movement. Mower is only 2 years old but its already had to have another drive belt installed by the dealer last year. wanted to do it myself but when i install belt theres hardly any tension so mower doesnt move. Checked and rechecked the diagram and is installed correctly. Cant find a tensioner adjustment if it has one.
ANSWER : I don’t have an answer for you, but Do you have a diagram of the Drive Belt?
What is the diagram for traction belt routing
ANSWER : Go to this website, upper right hand corner and do a parts look up.
Search for your model and that good stuff they ask of you and then
choose mower housing should be there, browse the site it’s really cool
and has a lot of info. http://www.jackssmallengines.com
I did a
sample search for generic riding mower deck and found great diagram of
belt routing. Give it a try you will find same results Good Luck! Don’t forget the thumbs!
ROUTING OF BELT – Mtd Drive Belt 42"
ANSWER : Diagram is on the mowing deckBest regardsCk
Diagram for belt replacement on 1988 Toyota Tercel
ANSWER : Fig. 1: Correct timing mark placement on 3E and 3E-E enginesHope this helps; also keep in mind that your
feedback is important and I`ll appreciate your time and consideration if
you leave some testimonial comment about this answer.
Thank you for using FixYa, have a nice day.
TIGHTEN BELT ON A LTS 2000 RIDING TRACKTOR – Craftsman 42 in. Deck 19.5hp Lawn Tractor
ANSWER : A) Which belt? There are at least two.B) If it is a Craftsman ( there is no model number posted) then all the belts’ tension is maintained by springs. There is no adjustments.C) The service model number is located on a label under the seat.
NEED A DIAGRAM OF HOW TO ROUTE A BELT ON A TROY BILT RIDING LAWN MOWER (DECK BELT) NOT DRIVE BELT. THANKS
ANSWER : Type in your model number to your search engine. find your model and the diagrams will be there.
hope this helps.