Ryobi
My Ryobi trimmer/edger won’t start
Experienced gardeners share their insights in answering this question :
Red normally means it is not done charging yet. It will turn green or go out when it is completely charged.
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
It is just a convention to denote that battery is charging or the battery is fully charging. Generally the condition of charging the battery is denoted by red light and the fully charged condition is denoted by green light.
Normal LED Indicator Meanings
A solid RED LED indicates there is an issue with the battery connection. A flashing RED LED indicates an error. A solid YELLOW LED indicates the charger is in Bulk charging. A flashing YELLOW LED indicates the charger is in Absorption Mode.
If the Battery still fails to work, check that the charger is working. Once the Battery is inserted/connected into the Charger, LED lights on the Charger will assist in this diagnosis. If flashing green: the battery is charging correctly. If flashing red: it may be a defective battery.
If you see a green lightning bolt, you`ll know that your device is charging or fully charged. If you see a red lightning bolt, a red lightning bolt with a charging cable icon, or no lightning bolt, you need to charge your watch. (This should take 30 minutes or so).
The battery light on your car dashboard signals a charging problem with your car battery. If the light turns and stays on, it might be that your alternator isn`t generating enough voltage to charge it. Common causes can be a broken alternator belt, damaged battery cells or a failed alternator.
You should also be able to leave batteries on the charger until they`re needed without the risk of overcharging or draining. In fact, there`s an Energy Save Mode that conserves energy when not charging or maintaining batteries.
The red one is positive (+), the black one is negative (-). Never connect the red cable to the negative battery terminal or a vehicle with a dead battery.
If your phone is bulging or swelled up, stop using it right now. If you notice your phone bulging in the middle or getting very hot on or off the charger, that`s a sign of a bad battery too, but you also need to stop using it right away and take it somewhere that a tech can look at it.
For example, in batteries that have a magic eye and show a green colour, a black colour and sometimes show total transparency, we have that: Green indicates that the battery is fully charged. Black colour, discharged battery.
A blue light means it`s fully charged. If it`s blinking red that means it running low on energy.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
Battery not charging. Light on charger is red for charge…it’s plugged in properly?????
Why is the red light blinking on the charger??
ANSWER : Either the battery charger or the battery itself is bad. The charger can be easily tested with a volt meter to see if it is producing the correct voltage to charge the battery. The batttery voltage can also be checked the same way. Some other users have had this same issue.
Ryobi 18v One+ battery won’t hold a charge. I have two of them and neither one will hold the charge. The charger is the Ryobi 18v charger plus. I have the same problem. As soon as I put the battery in the charger (even if it is dead) the “charging”, and the “fully charged” lights both come on. Even if I leave it for a day the battery will not charge.
ANSWER : If it’s both of them then i am thinking you have a faulty charger. i have seen mine do that, i got a new charger and it worked properly.
Though my Worx WG781 cordless 36V, 19 inch lawn mower came with what appeared to be a fully charged battery according to the battery LED lights , it is suggested that it be put on the charger “over night” to insure a complete charge. The charger LED light is supposed to flip from red to green when charging is complete. The battery has been charging for nearly 12 hours and the LED light on the charger remains red. Is this normal?
ANSWER : I have a different problem. When I try to charge my batter, the red light comes on for about 2 seconds, then goes out. The battery is not charging. Out of frustration I purchased a new charger, and it does the same thing. Thinking the battery was the problem, Worx sent me a new battery, but the exact same thing happens regardless of which charger is hooked up to either battery. The red light comes on for a couple of seconds, and then goes out. Any suggestions appreciated.
New unit only used maybe 6 hours.battery will not charge .when put on charger light goes red about 5 seconds and then goes green as if charged even when left on charger about an hour..then when go to trim grass runs about 7 seconds
ANSWER : No solution-I have the same exact proplem-faulty product-plan to send it back
The battery is not charging. I am getting a red blinking light.
ANSWER : That is the typical issue of dell batteries, They called back for several times.
My battery is less than 1yearn and it is bad according to the blinking red light on the charger. can I get a free replacement battery/ the battery charged the first time I used it this spring. the second time I tried to charge it the rad light was blinking. please respond as soon as possible.
ANSWER : Usually batteries are not covered under a warranty, IF they worked in the beginning. It has a lot to do how it was stored in the winter, it could have been your problem and not the batteries.
I am having problems with the battery on my worx gt trimmer. It will not stay charged even though the battery charger indicates a green light. What am I doing wrong? I put it back on he charger it will read a red light and then switch to green after a few seconds.
ANSWER : You can determine exactly what is going on by using a small handheld voltmeter. They are inexpensive, easy to use and come in very handy. Just test the output of the charger (after noting what the volt-output-rating is) by touching the leads of the meter to the terminals on the charger. If the charger is working at all, this is not a dangerous test. Conversely, test the output of your batteries by touching the leads of the voltmeter to the terminals on them. I suspect the charger is bad because after they overheat, they quit working and some don’t last very long. I don’t think YOU are doing anything wrong, just maybe the companies that manufacture these 2 electrical products are.