Garden
Experienced gardeners share their insights in answering this question :
Please repost your problem in the correct category. This question is up in the Lawn Trimmers and Edgers forum.
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
The BLACK+DECKER® 4-slice toaster oven features exclusive under-the-cabinet spacemaker design. With it`s curved interior, you can fit up to 4 slices of bread or a 9″ pizza.
While some toaster ovens are appropriate for storing and using in a confined space such as an open wood cabinet, many radiate too much heat to do that safely. It is recommended to purchase a cool touch toaster oven and possibly even use a toaster shield on the wood behind and above the toaster oven for maximum safety.
Does a built-under double oven need a cabinet? The answer is no, a built under double oven will not need a cabinet for installation. They can simply fit under your kitchen countertop.
Building an oven into a wood cabinet is a great way to save space in any kitchen, and it creates a nice clean look. The unit is usually built under or above the cabinets and provides an ideal storage space for all of your cookware.
What is the difference between built-in and built under ovens? A built-in oven is placed in a kitchen cabinet at eye level, while a built under oven is placed under your kitchen counter.
We recommend at least 6″ of empty space between the oven and any other items all around it.
Install a heat shield for the cabinets next to or over your stove for peace of mind. Designed to endure the intense temperatures generated by stoves and ovens, cabinet heat shields are made to safeguard your cabinets from heat-related damage.
Yes, a regular three prong outlet (grounded) should work.
But you don`t want to use that one either, you don`t want to trip your fridge breaker. Toaster is probably around 1200 Watts; Microwaves run about 1400 W. Most branch circuits (all the outlets wires to one circuit breaker) will handle 1800–2400 Watts total. So yeah, it will trip the breaker if on one breaker.
Most manufacturers recommend running the toaster oven at a high temperature for about 20 minutes before cooking with it. This is to burn off any packaging/manufacturing residue. This process is usually accompanied by an unpleasant chemical odor.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
Assembly instructions for Palm springs 10 x20
ANSWER : Palm Springs 10’x30′ (3m x9M) party tent set up instructions.Hope this helps.
Read Full Q/A … : Garden
We lost the instructions onhow to put it together..please help. brown steel gazebo 10 x 12 x 6.8 ft
ANSWER :
Read Full Q/A … : Garden
10 x 30 gazebo tent set up instructions.
ANSWER : Refer your request directly to Quictent.
Read Full Q/A … : Garden
I need assembly instructions for a 6x3m party tent
ANSWER : Contact manufacturer directly, they usually prefer that you do.
They will be glad to forward you a set of instructions!
They will be glad to forward you a set of instructions!
Read Full Q/A … : Garden
I received an undercounter spacemaker toaster oven and there is no installation instructions enclosed. Please help
ANSWER : Please repost your problem in the correct category. This question is up in the Lawn Trimmers and Edgers forum.
Read Full Q/A … : Garden
Mower will not start a bag caught in the blade but that didn’t seem to harm it, but to get the bag out I shut it down and removed the safety plug and turned the mower just up enough to get the plastic bag off the blade, then put it back down, put the safety thing back in and now it won’t start. Curiously, the safety thing won’t go in all the way, but it seats down, if I push on the start handle, so it’s like there’s something funny going on at that point. But, once I seat the safety thing that way, and then turn the main switch on and off, making sure to properly operate the safety bail as well, it still won’t start now.
ANSWER : Did you lift it high enough to get oil into the cylinder? It will seep back down but the plug may need to be cleaned up a bit. You can soak it is solvent, laq thinner, gas, or bake in the toaster oven, But the wife might not like that idea. Get it back in there and give it a spin, see what happens. You might have to do it a couple times. As far as the safety thing, I don’t know what happened there, But I think you may have pulled it one way or another too far when you tipped it up. Hope this helps.
Read Full Q/A … : Garden
Shed manuals #1934878 INSTRUCTION MANUAL
ANSWER : Contact manufacturer, they can assist you.
Read Full Q/A … : Garden
Trying to replace a drive belt on the tractor. The pin that keeps the belt on the transaxle pulley is so close I can’t get the belt on the pulley. trying to follow instructions in the book but it is impossible. Been working on it for 2 days.
ANSWER : Have replaced the belt a few times on my 48″. Don’t know if its the same model you have, but here’s the way i’ve found to do mine:
The front pulley can be easily removed and i slip the belt onto it while holding it up just before re-inserting the pulley onto the shaft.
The belt is first slipped over the rear pulley and kept in a straight line toward the front pulley without winding it around any of the holders or anything to give it the maximum length. Also the clutch pedal has to be pressed/held down while doing the install. To remove the front pulley: take the plastic guard off the top center of the motor revealing the large center nut; place large crescent wrench or soemthing to hold the nut and then loosen the center pulley bolt from underneath with socket. Pulley will slide off sometimes after a few taps downward w/ a wooden mallet. Note there is a slot inside the pulley shaft that lines up with a raised area on the motor shaft. don’t overtighten when re-installing, maybe lube the bolt a little ’cause you may need to take it off again in the future.
Let me know if you need more details.
Thanks,
GT
The front pulley can be easily removed and i slip the belt onto it while holding it up just before re-inserting the pulley onto the shaft.
The belt is first slipped over the rear pulley and kept in a straight line toward the front pulley without winding it around any of the holders or anything to give it the maximum length. Also the clutch pedal has to be pressed/held down while doing the install. To remove the front pulley: take the plastic guard off the top center of the motor revealing the large center nut; place large crescent wrench or soemthing to hold the nut and then loosen the center pulley bolt from underneath with socket. Pulley will slide off sometimes after a few taps downward w/ a wooden mallet. Note there is a slot inside the pulley shaft that lines up with a raised area on the motor shaft. don’t overtighten when re-installing, maybe lube the bolt a little ’cause you may need to take it off again in the future.
Let me know if you need more details.
Thanks,
GT
Read Full Q/A … : Garden
