[SOLVED] I Need An Intake For A Poulin Push Mower With A

“Poulan” Push Mower

I need an intake for a poulin push mower with a 6.5 B&S quantum engin and there are no part numbers anywhere on the engine how do i get the part ?

Experienced gardeners share their insights in answering this question :

“Model-Type-Code” numbers on a Quantum Series are usually located on the sheet metal right above the muffler. If not there, remove the plastic cover from the blower housing and check on the blower housing near the spark plug wire.
Hope this helps

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

The intake Manifold is part of your outdoor power equipment`s air intake system which plays a vital role in managing the air required for cylinders in the engine to function properly.

Poulan is a brand name of the Swedish manufacturer Husqvarna AB.

Equipped with a powerful, high performance Briggs & Stratton® 163 cc 675 EXI Series engine, the Poulan Pro PR675Y22RHP features the ReadyStart® starting system, with no priming or choke required — gauranteed to start in 2 pulls or less.

Intakes are vital automobile components that work to bring oxygen – a key ingredient in an internal combustion reaction – into the engine`s combustion chamber to modulate how much oxygen mixes with burning fuel.

Located directly behind the front grille, the air intake system draws air through a long plastic tube going into the air filter housing, which will be mixed with the car fuel. Only then will the air be sent to the intake manifold that supplies the fuel/air mixture to the engine cylinders.

For more than seven decades, Poulan Pro has been making outdoor power equipment homeowners can rely on year after year. Our products are built with pride in our factories in McRae, Georgia, Nashville, Arkansas and Orangeburg, SC.

Yes, Poulan chainsaws are good. In fact, one of its models, the Poulan 306A Chainsaw, was the chainsaw used by Leatherface in the original Texas Chainsaw Massacre movie.

The chain may not have the proper amount of tension. If the adjustment screw is too loose, the chain may not make good contact with the wood. If the chain is too tight, the chain may not rotate at the proper speed, causing the chain not to cut properly. To adjust the chain, tighten or loosen the adjustment screw.

There may be old or bad fuel in the carburetor float bowl. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and make the engine hard to start. If the carburetor is clogged, try cleaning it with carburetor cleaner.

Meet the Parent and Engine Manufacturers

The Husqvarna Group is the parent company of Poulan and other “offspring” brands, such as McCulloch, Weed Eater and Jonsered. Husqvarna has been producing outdoor power products since about mid-20th century, but it came into existence as a weapons foundry in 1689.

Husqvarna definitely owns Poulan. I`m sure they still make some of their original good quality stuff in Sweden. Husqvarna bought Poulan.

With U.S. headquarters based in Charlotte, North Carolina, the company operates multiple manufacturing facilities across North America. Poulan Pro is a part of Sweden-based Husqvarna Group`s global portfolio of brands.

In England, inlets are called intakes, which is a more accurate description of their function at low aircraft speeds. At high speeds, a good inlet will allow the aircraft to maneuver to high angles of attack and sideslip without disrupting flow to the compressor.

Traditionally, the inlet valve is situated to the left of the cylinder, with the exhaust valve found on the right. This means that the gasses within the engine have to travel across the head from inlet to outlet, hence the name.

The Average Cost for an Intake Manifold Replacement Is $200-$1,100 Depending on If You Go to the Mechanic or DIY. This price range is based on national averages for all vehicles and does not factor in taxes, fees, or your particular make and model. Related repairs or maintenance may also be needed.

Look for a sticker on your Poulan riding lawnmower that includes the year of manufacture, which may be either typed onto the sticker or stamped directly onto the sticker`s face. Alternatively, examine the warranty or purchase paperwork for your lawnmower for the date of manufacture.

Hydropower was required in the manufacturing process, so in 1689, a drilling works was established beside the water falls in Huskvarna, southern Sweden (at that time spelled Husqvarna), where many products are still produced today.

The origins of Poulan Pro can be traced back to Shreveport, Louisiana, where the Poulan Saw Co. was founded in 1946 by veteran lumberjack Claude Poulan.

Since 1971 STIHL has been the world`s top-selling chain saw brand. The company was founded in 1926 and is based in Waiblingen near Stuttgart, Germany.

Husqvarna, the brand name for home appliances manufactured by Electrolux. Huskvarna, a city, the original location of the company.

By tuning the intake manifold, the engine can develop more power. An improved air-fuel mixture achieves higher combustion levels and temperatures. Furthermore, this higher pressures are achieved. Overall, this increases the performance of the engine.

An engine air filter cleans the air that enters your engine before combustion so that the air that helps the fuel ignite is cleaner and free of particulates potentially causing longer-term issues. Think of it as your car`s lungs. For every gallon of fuel injected, roughly 10,400 gallons of air flows through the filter.

The air intake hose`s function is to connect your vehicle`s factory air box (or aftermarket cone-style air filter) to the intake manifold bolted to the engine. Aftermarket units are often installed to increase airflow to the engine, which can result in increased power output.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

I have had a poulan pro 550 series push mower for almost 1 year at the end of the season last year the mower would start briefly and then stop. i have cleaned out the air filter and that did not help.the mower started, i made one revolution around the yard 3/4th of the way the mower quit. I then primed the mower it started then quit and now it will not start at all. Does anyone have any suggestions of what to do. Thanks

ANSWER : There is a little spring that works the carburetor arm. If that popped off then the mower will not run.

Read Full Q/A … : “Poulan” Push Mower

What type of oil do I use , in my Bolens 414A 5.5 torque, 21′ cut push mower ?

ANSWER : Hi,Any good quality 30 weight motor oil…heatman101

Read Full Q/A … : “Poulan” Push Mower

Lawn mower cranck but wont start…

ANSWER : Since you already checked for spark and air I would drain all the fuel out of it and check that fuel for water. Over time some lawn mowers end up with contaminated fuel. You can see the water sitting on the bottom of the fuel if you let it stand for a bit in a small plastic bowl.

Be sure to empty and dry out you fuel can as well. Especially if the mower stopped running right after a refuel. Which is a good sign your gas can is contaminated too.

Read Full Q/A … : “Poulan” Push Mower

MY POULAN PRO 6.5 WONT START….nEED TO REPLACE SPARL PLUG BUT DO NOT KNOW ‘right one”..

ANSWER : Take the old plug out, any auto store should be able to match it up.

Gary

Read Full Q/A … : “Poulan” Push Mower

I have a Poulan push mower that after mowing in a ditch started making a loud noise and running rough. It almost sounded as if metal was hitting metal. The mower was vibrating more than normal. I checked under the mower and nothing is hitting. After a few times of stopping the mower engine because it sound as if it is going to die down the mower will not start now. The shaft does not appear bent and the blade appears ok. The mower has oil, a good spark plug and a clean air filter. It was running fine until that moment. I did not see anything that I hit but it is possible I hit something in the ditch like a pine cone or branch. What could the problem be and how would I go about fixing it?

ANSWER : If you are sure the oil level is correct then it sounds like it’s about to die, unfortunately. A pine cone shouldn’t cause any damage, but a large branch may do so. Was it smoking before you shut it down? The vibration could be caused from a bent blade. It could also be caused from a part breaking in the motor. I wish I could have given you better news!

Good Luck,

Jim

Read Full Q/A … : “Poulan” Push Mower

After a rainny week, bad fuel developed in my fuel tank before I tryied to cut the grass. Now my mower runs high and low speeds and cuts out when cutting 6-8 inch grass. I am sure my curberator needs a good cleaning however, i am unaware of where it is. I have a gas tank and a prime button directly over it. Can you please help me locate the carburetor, resolove my issue, or both.

ANSWER : Yes, you are right, the carburetor does need cleaned. I’m send you a link to a video that will help you do this job: Good Luck!Jim

Read Full Q/A … : “Poulan” Push Mower

I have a 2 year old Toro push lawn mower that will not start. Everything has been tried: new plug, new gas, new air filter, even tried starter fluid. There is not even a sputter.

ANSWER : Try an few of these :http://www.fixya.com/support/r8406168-top_10_lawn_mower_problems_solutionsgood luck Joe

Read Full Q/A … : “Poulan” Push Mower

My Self-propelled push lawn mower is no longer “self-propelled” while the wheels are on the ground. When not on the ground, the wheels engage but VERY slow.

ANSWER : Try putting new bail one it and see what that dose
9 out of 10 that’s what is

Read Full Q/A … : “Poulan” Push Mower