Experienced gardeners share their insights in answering this question :
You most likely sheared the flywheel key. When this happens the flywheel is not in the correct position so the ignition timing is off, preventing you from starting it. This is a doable repair if you have tools and are handy with them. If you do not or are not, then you will want to get someone to do it. If you need me to I can tell you how to do it if this is something that you want to tackle.
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
Rock gardens provide the opportunity for a garden without over-filling your yard with plants. This gives the illusion of a larger space and still leaves an adequate area to sit and enjoy your plants.
To remove existing plants in the perennial bed during garden renovation, cut a circle around the crown of the plant with a sharp spade and pry the roots up and out. For larger perennials, it may be advisable to cut the plant into smaller sections while still rooted in the soil.
Our use of rocks and minerals includes as building material, cosmetics, cars, roads, and appliances. In order maintain a healthy lifestyle and strengthen the body, humans need to consume minerals daily.
If you have drainage issues on your property, rock is a great mulch choice, allowing water to drain quickly. If you have open bed areas without plants, rock is an easy, no maintenance option. Rocks are great for high-traffic areas, where pedestrians tend to take short cuts.
A rock garden, also known as an alpine garden or a rockery is a small plot of land that is decorated with stones, boulders and rocks, arranged in a way that allows for small plants to be planted among the rocks.
The Rock Garden of Chandigarh is a sculpture garden in Chandigarh, India. It is also known as Nek Chand`s Rock Garden after its founder Nek Chand, a government official who started the garden secretly in his spare time in 1957. Today it is spread over an area of 40 acres (161874.25 m²).
A gel-like super glue is usually easier to work with on rocks, but the classic liquid super glue will do the job as well. Squeeze out just a dot of glue onto each rock where they will meet. Applying too much glue won`t make the bond any stronger—but it very well might make a stick mess!
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
I hit a rock while mowing and now the mower is vibratating badly? What do I need to Do?
Either the blade or the crankshaft is bent.check bladefirst,if bent change out the blade.if this doesn’t work the crankshaft is bent.from there it depends how much you want to spend on that unit.the crankshaft is high dollar part
I hit a rock with my push lawnmower. The
Oooh boy, I know you bent the shaft, but why it is blowing oil out the carb, I don’t know if I would even bother with the blade, you could go buy the same mower, then you would have some parts. Unless you just bumped it hard enough to throw oil around in there, it might settle down, but it is a long shot. I hit a stump once and bent the crank, it was lights out for that mower. Hope this helps.
I hit a rock motor died turnsover free wont fire
It is common after hitting a rock for the key to shear on the flywheel to crank remove the flywheel and check it
Compression lockup on warm start – Toro Power Lawn Mower
Hidid you hit any rocks or stumps? if your blade hit something it will sheer a key on the flywheel and will throw the timing out all is needed is that 2 dollar key if u can take it apart a good sign when the timing is thrown out like that the rope likes to rip your arm offJoe
The engine starts and the blades can turn. Both of the belts are on, but the mower will not move in either direction. The blades were raised before going over a tree root. the mower rock back and forth because of the root and the mower stopped
Sounds to me as if you have broken a shear pin in one of the drive pulleys. They are made this way so a shear pin will break instead of doing real damage to the drive train itself.
A friend has a poulan push mower and hit a pretty big rock with it, and now when you pull the pull cord to start it, it pulls hard and will not start. It is not the flywheel key sheered off, that is fine, so I am wondering if there is something else it could be or if the drive shaft got bent and it needs to be scrapped?
Hi, it sounds like it’s most likely that drive shaft. If the drive shaft gets dirty or dry you’ll get the same problem with the pull cord being hard to pull, so more than likely that shaft got bent somehow and now it won’t pull.If you turn the mower over, can you turn the blade by hand? Maybe you can see if the shaft is bent as you try to turn it.
Does the Toro self propelled have problems in rough areas . I have heard the crankshaft can be broken.
How do you define rough areas? If you are mowing a rocky area then, yes, there could be a problem. Otherwise, you should not have a problem, even if the mower is set too low to the ground for high grass or thick brush. The crankshaft does not break that easily, my friend; you would have to hit a big rock with the blade with enough force to break that crankshaft.
I hit a big rock with my walk behind lawn mower and now it sounds really bad when it is running. Whats is wrong with it?
The flywheel key is broken.take the recoil cover off.take the nut off that holds the flywheel on.thake a hammer and lightly hit the flywheel oppisit side of key way.the fly wheel will come off.replace the key.replace the flywheel.replace the recoil cover and test run the mower.should be fine.let me know if this helped…………….