Black & Decker

Experienced gardeners share their insights in answering this question :
Hi,The chain is part #623382 00 and can be purchased at toolpartsdirect.com for one place. I like this place as they ship quickly and aren’t overpriced. Use a 5/32″ sized-file to sharpen the chain at 30°.The correct size chain is a 3/8″ pitch, gauge 0.043.The brand Oregon offers these chains also. You might find one at your local outdoor equipment place or chainsaw place.Hope this helps. If it does, I’d appreciate your vote. Thanks,Handie Andie

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

The main thing to remember is that the pitch of your chain will be the biggest determinant of what size of a file to use. The pitch is the distance between any three drive links, divided by two. The larger the pitch, the higher the cutting teeth rise and the larger the file you will need.
There are three main reasons for a chain to come off: Incorrect bar and/or chain for the saw; check to be sure that you are using the proper chain pitch, gauge and number of drive links to match the guide bar. Chain not properly tensioned; It is normal for a new chain to stretch and require frequent adjustment.
The size of the chainsaw comes down to the length of the chainsaw bar size itself. The length determines the type of work it is best suited for as well as amount of volume it can handle.
OREGON 558549 Maintenance Kit (File Size 0.2 inches (4.5 mm)), Stand Saw Chain.
Generally speaking, the chain should be a little loose on the chain saw guide bar, but not loose enough that the drive links come out of the bar nose. The bar links should feel like they are raising up, but not actually come out of the guide bar.
There is a tension screw located near the base of the bar on the chainsaw. To tighten the chain, turn it clockwise, and to loosen turn it counterclockwise. Don`t over-tighten the chain as this could cause it to break.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

I have a Poulan chain saw (PN 4620) can you tell me the size of the file to sharpen the chain. Thanks
ANSWER : 3/8 low profile chain requires a 7/32 file

Read Full Q/A … : Black & Decker

What size file do i need to sharpen the chain on a poulan wid thing?
ANSWER : I have the same saw. It takes a 5/32 file.

Read Full Q/A … : Black & Decker

What size file for a 20 in. saw ? – Husqvarna Chain Saw 20" Bar
ANSWER : 3/8 chain uses a 7/32 file, and .325 chain uses a 3/16 file, unfortunatly both are available in 20″.

Read Full Q/A … : Black & Decker

I was using the saw as a chain saw last weekend to cut up an old tree stump when the chain came off. I don’t know how to access it to put it back on and don’t have a user manual. The saw belonged to my late father and I don’t know if he even kept the manual.
ANSWER : You will have to remove the cover on the side the chain bar goes into. There should be one or two nuts holding the cover on the side. The is also a chain tension adjuster you may have to loosen to put it back on. Make note of the direction of the teeth on the chain. It is an directional chain. The tension adjuster is usually a flat head screw on the front side right beside the chain bar.Unless it is a really old saw, manuals are available from most manufacturers for free download. See if you can locate a brand name and model number.

Read Full Q/A … : Black & Decker

Remington pole chain saw model 106890-02. Chain
ANSWER : We are in no way connected with RemingtonPower. They are no longer in production and replacement parts are very difficult to find. Often eBay is your only source of parts. Sorry. Lou

Read Full Q/A … : Black & Decker

Saw just stop working doesn’t come on check switch looks good. have move then one saw and 2 have just stop running after a while of cutting. Neither where over heated. I have 3 saws 16″ 14″ and pole is the switch the same in all three brfore I take the working one apart. Help.
ANSWER : Did you try them directly in the outlet or with a different extension cord? Have you checked the outlet for the correct power? Did you try a different outlet? Provide model numbers for the bad saws and I will provide an IPL with switch part numbers. Reply below.
Lou
Are you aware RemingtonPower is no longer in production?

Read Full Q/A … : Black & Decker

Need a replacement guide bar for a Model 106821 A Remington pole chain saw.
ANSWER : I found an operator’s manual but it doesn’t include an IPL. I wasn’t able to find any IPL for this item. I’d suggest you try the manufacturer here:
Remington.com
http://www.remingtonpowertools.com/find_manual.cgi
HTH
Lou

Read Full Q/A … : Black & Decker

What Size File for a Husqvarna 240 Chain? – Husqvarna Chain Saw 20" Bar
ANSWER : The 240 runs standard a 3/8 ” pitch H36 low profile chain. The proper size file is 5/32″ (4.0 mm)

Read Full Q/A … : Black & Decker