Sounds like the valve clearences are to wide they need to be 0.004 thou for overhead valve models.Hope this helps.Mark.
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
If the car cranks when you turn the key, but the engine won`t start, it could be because fuel isn`t getting to the engine. One potential reason for this could be dirty fuel injectors. Over time, the fuel injector nozzles can become clogged with rust, corrosion or debris.
If the starter motor spins but does not crank the engine, you likely have a problem with… Faulty or damaged battery. To address this issues, check the battery and charging system for problems.
Loose, Dirty or Disconnected Spark Plug in Your Lawn Mower: Check it out, clean off debris, re-connect and tighten. Dirty Air Filter: Clean or replace. Fuel Not Reaching the Engine: Tap the side of the carburetor to help the flow of gas. If this doesn`t work, you might need a new fuel filter.
You Lose Power in the Middle of Mowing:
Here`s why this happens and what you can do: Dirty Air Filter on Your Lawn Mower: Clean or replace. Dirty Spark Plug: Clean or replace. Build Up of Clippings & Debris: Clean underside of your lawn mower deck as noted above.
Bad Sensors
One common culprit for this problem is the crankshaft position sensor, which measures the position and speed of the crankshaft. The computer uses the information from this sensor to know when to fire the spark plugs. If the sensor isn`t working, the spark plugs won`t fire, keeping the engine from starting.
As a camshaft position sensor weakens, so does the data it transmits to the ECM. Eventually the data signal becomes so weak the ECM switches off fuel and spark delivery, and your engine will not start.
If you just hear a whirring sound like the starter motor is spinning without affecting the motor, then the solenoid is either broken, or there`s a wiring issue on the starter itself. Options are: have the starter rebuilt, replace the whole thing, or see if you can track down the wiring issue on the starter.
The simplest cause of this sort of fault is a loose or corroded electrical connection. If there is a fault with the internal windings of the starter motor, bad brushes, or other electrical faults, the starter motor may lack the torque to crank the engine.
The most common reason for a surging lawn mower engine is a blockage in the fuel supply, but there are other possibilities: Bad gas. Bad spark plug. Dirty/faulty carburetor.
Use Carburetor Cleaner Fortunately, you can generally do this without even taking the carburetor out of the engine. Start by purchasing some commercial lawnmower carburetor cleanerOpens a new window, which comes in a simple spray can and will make it easy to clean the inside and outside of the carb.
If the engine will idle but dies at full throttle the main jet in the carburetor may be plugged. You can repair a plugged main jet by cleaning it, replacing the jet, or replacing the carburetor. If you choose to clean or replace the main jet, you will also want to clean the rest of the carburetor.
A full gas tank and oil reservoir are the essential first steps when checking why the lawn mower won`t stay running, but the problem could also be a dirty filter, clogged carburetor, improper fuel mixture, or a dirty spark plug.
A Bad Crankshaft Position Sensor The crankshaft position sensor monitors the position and rotational speeds of the crankshaft. Without the crank sensor, the engine control module (ECM) wouldn`t know when to fire the fuel injectors and ignite the spark plugs.
Quite rarely but surely enough a bad throttle position sensor can create a no-start condition where you may be able to just crank the engine and not turn it over.
The most common reason cars don`t start is a dead or faulty battery. Even though most cars run on gasoline, they all require electrical power to function. The starter that cranks your engine to start requires an electrical signal to fire. If something`s wrong with your battery, your car engine won`t turn over.
Check to see if the switch and terminals are free from rust and replace any damaged or broken spark plugs wires as necessary. Alternatively, it could be a bad ignition module. A simple way of testing the ignition module is to leave the car idling for 30 minutes and then tap the ignition module with a screwdriver.
