Garden

Experienced gardeners share their insights in answering this question :
Hi bbjames007…
I got as far as I could go to get you the webpage for your drivers, but I could not get them, because you did not say which operating system you had on your computer…Sorry
But you can get them, just go to this webpage, enter your operating system and the next window that opens has your driver for your Canon mp250 series printer
Please take time to rate me

http://www.canon.ca/inetCA/serviceDetail?m=load&id=5&sid=27&mid=0002200571&type=S

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

The printer may not be recognized if you install the printer driver with the printer turned ON. Always turn OFF the power before installing. 2. When the following screen appears, connect the computer and the printer with a USB cable, and turn ON the printer.
MP Drivers: The driver for Canon IJ multifunction printer. IJ Scan Utility: The software that allows you to easily scan photos, documents, etc. IJ Network Tool: The software that performs the setup for printing in the network connection.
It`s usually because the printhead inside your printer is clogged or dried out. Like with most printers, Canon printheads can clog due to ink or dust drying up and collecting in the nozzle.
An incompatible driver or corrupt file may be the reason you experience the Driver Unavailable error. Luckily, this is easy to fix if you take a methodical approach. All you need to do is check for any Windows updates and then install the latest driver for your printer.
Start by checking your hardware

If you`re using a wired printer, make sure that the printer cable is properly connected from the printer to your PC. For wireless printers, check the wireless connection. Make sure the printer`s wireless option is turned on and available.

Simply plug the USB cable from your printer into an available USB port on your PC, and turn the printer on. On the taskbar, select the Search icon, type Printers in the search bar, and then select Printers & scanners from the search results to open the Printers & scanners system setting.
The printer driver may not be installed correctly. Uninstall and re-install the printer driver. – Make sure that there is a direct connection between the printer and USB port of the computer. Reboot the computer with the printer`s USB cable unattached and reconnect the cable once the computer has restarted.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

No compression when I pull the cord on my lawnmower Briggs and Stratton. What do I look for and how do I fix it?
ANSWER : There could be a whole bunch of things to cause this, from a badly worn engine to just a valve stuck open, a dealer could do a leakdown test on the engine and give a more definate reason for the problem, or you could remove the cylinder head ( side valve engine ) and check the valves are opening whilst turning the engine.

Read Full Q/A … : Garden

I cant print because i have no driver on canon inkjet mp258
ANSWER : Hi bbjames007…
I got as far as I could go to get you the webpage for your drivers, but I could not get them, because you did not say which operating system you had on your computer…Sorry
But you can get them, just go to this webpage, enter your operating system and the next window that opens has your driver for your Canon mp250 series printer
Please take time to rate me

http://www.canon.ca/inetCA/serviceDetail?m=load&id=5&sid=27&mid=0002200571&type=S

Read Full Q/A … : Garden

JD 4020, how do you replace the o-rings and nylon sprial washers in the remotes at the rear of the tractor ?
ANSWER : You have to use a pick shaped like a small hook to get them out. I have done it before. Buy the kit a john deere and have them print you out a diagram of how they go. I can’t remember exactly what order it has been a while. But use the pick and work them out. Then clean it all real good with clean rag. Use hydraulic oil on them when you reinstall them. I believe it is a o ring first. Then coil, Followed by another o ring. You oil them up and work em in with your fingers. May have to use old wore out small flathead screw driver so it won’t have sharp edges and damage it. And the coil you have to start one part of it and work it in around in circle. You know pull it apart and feed it in. Now that I think of it I think the coil has to go in first then slide the rear oring in past it and work it in from behind. Then the outher one. But look at diagram. It isn’t real hard. Oh ya, You may have to take the outher cover off of it first. Should be one small bolt? Not sure if that was on our 40/20 to or just our 4455. Good luck let me know if you have any questions. I will try to check back.

Read Full Q/A … : Garden

How to rewind pull start rope ryobi gas blower ry09550
ANSWER : You need to pull it all the way out at the roller/wheel, get screw driver or some thing that can jam it not to let it roll back, and tight the rope to it and make sure not to slip the rope, and hold the roller/ wheel until you done with the rope, and release the roller/ wheel gentle slowly, let it wind in the rope.

Read Full Q/A … : Garden

My Husqvarna 128ld trimmer will run but only at low rpm. I cant find a tool to adjust the carb. If I choke it 1/2 it will run at higher rpm, I suspect a fuel problem. It started in an instant.
ANSWER : Guys,the d shaped tool is also carried as an MTD part. see your local dealer.If not google walbro d cut tool ad see what you get. They’re on solo chainsaws as well

Read Full Q/A … : Garden

I cant get the water to come out my pressure washer
ANSWER : If you haven’t already tried to start it with the water off, and you have ample hose pressure, then your o ring is shot in the pump housing and you have to replace it.

Read Full Q/A … : Garden

Starts fine but just as I start to cut the wood it bogs downs and sounds like it is flooding out. I can back it off, rev it up and the same thing all over again.
ANSWER : It is unusual for a machine to richen up when it starts cutting, chainsaws normally run a little rich free running, when they start cutting they need the extra fuel to keep it going under load, it is much more likly it is running too lean, start by cleaning the air filter, if there is a spark arrestor in the muffler take it out and clean it ( a gauze in the exhaust outlet ) pull the fuel filter out of the tank and replace the filter on the end, failing this it may well be a carb adjustment required, there is a special tool required to adjust many of these carbs ( the screws are splined ) this will require a workshop adjustment, or making a tool to fit over the screws so as to turn them, try using a short peice of tube that fits tight over the screw, push a suitable screw driver in the end od the tube to allow you to turn the screw, turn the H and the L screw out 1/2 turn on each , has this improved the running, if so it is running lean.

Read Full Q/A … : Garden

Mower Won’t Start
ANSWER : Check your start 20-30 amp fuse, Should be on right side of motor, sitting on it.

Read Full Q/A … : Garden