Mighty Lite Lawn Trimmer
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
The trimmer line is crossed on the spool: If the trimmer line becomes crossed on the spool while being loaded, this can cause it to refuse to come out during trimming. Be sure to load trimmer string onto the trimmer straight without crossing over the lines to avoid this problem while trimming.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
Blades wont turn – Toro Power Max 726 OE Snowblower – 37771
Check and see if you have a broken belt. first.
Vibration when auger is engaged in Toro 726 oe
Be sure to check pulleys for a rock or anything else lodged in there
then check rear bearing for alot of play up and down
I forgot to add oil to my toro ccr powerlite e. should i remove the gas and start all over again?
!!!!!! dran the gas put in the neww mix gas and pray for the best
Will not start toro model143.026706
If it stopped running after hitting something with the blade check the key on the flywheel where it meets the crank
Snowblower wont go into gear
Adjust the cable to the shifter arm
Toro recycler will start until primed gas is consumed.
I had similar problem and cleaned the spark plug and that seemed to have worked, but I think that may be a temporary fix because the engine still seems to be running unevenly. I feel that it must be a larger problem with the carb. If anyone can help this novice to adjust the carb or clean both carb and filter, or offer other solutions I would appreciate your assistance.
My toro self propelled only runs for a few minutes. I replaced air filter and spark plug, and cleaned out carb. Any ideas?
Have you tried replacing the gas cap? I had the same problem with my mower and did everything you have done, changed gas cap no problem since
Chute control stuck in one position
Take it off and see if you broke it you may have broken it inside easy fix