Garden

Experienced gardeners share their insights in answering this question :
Listing under chain saws is not going to get you any answers

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Some USB sticks have a mechanical switch on them that puts them into Write Protect mode. This can be a very small slider switch that may have caught on something in your pocket or computer case. If this is the situation, simply move the switch to the unlocked position and copy files again.
What does it mean when you receive “The disk is write-protected” error message while trying to format a flash drive, pen drive or SD card? It means the Windows operating system has set administrator limitations, the registry entry is damaged, virus infection or third-party encryption software locked your USB pen drive.
How can I change the write-protected USB in Windows 10? Look for a lock switch on the USB device and toggle it to the off position. Use the diskpart command instead, or set the WriteProtect value to 0 in the Windows Registry Editor.
Flip the USB Flash Drive`s Switch

We`ll start with the easiest fix first. Many USB flash drives have a switch, usually at the sides, by which you can turn on/off the write protection from the outside. Slide it off if your USB drive has one too. Reinsert your USB drive and see if you`re able to format it.

Go to My Computer/This PC and under Devices with Removable Storage, look for your pen drive device. Right-click on it and click Properties. Click Edit, in the pop-up box, sometimes there`s an option to Remove write-protection. Change the status of this option and try again.
Method 1: Check the Lock Switch

So, if you find your USB Drive locked, then you should first check the physical lock switch. If the lock switch of your USB Drive is toggled to the lock position, you need to toggle it to the unlock position to unlock your USB Drive.

How do you remove write protection on a USB stick? If you are using a SanDisk USB stick that has a lock switch, make sure the Lock switch on the left side is slid up (unlock position). Otherwise, you will NOT be able to modify or delete the contents on the memory card if it is locked.
Fix 3. Uncheck Read-only Status to Remove Write Protection
  1. Right-click the file with write protection and select “Properties”.
  2. Check the options on the bottom, ensure that the “Read-only” option is unchecked. Then, click “Apply” to let this change effective.
10 avr. 2023
Fix 3. Uncheck Read-only Status to Remove Write Protection
  1. Right-click the file with write protection and select “Properties”.
  2. Check the options on the bottom, ensure that the “Read-only” option is unchecked. Then, click “Apply” to let this change effective.
10 avr. 2023

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

What size file do i need to sharpen the chain on a poulan wid thing?
ANSWER : I have the same saw. It takes a 5/32 file.

Read Full Q/A … : Garden

Working on farmall super a tractor distributer had been pulled so trying to reinstall but can’t find timing marks
ANSWER : Remove valve cover,bring #1 cylinder top dead center,make sure both push rods are loose,put you dist in and were ever your rotor is pointed that will be your number one wire.then you will have to adjust you timing when started by ear,I hope this helps you

Read Full Q/A … : Garden

Makita 5012B 12” Electric Chain Saw file size says it is part #744003-1. What is the equivalent in mm or inches for a metal file?
ANSWER : .325 chain takes a 3/16 file
91 chain takes a 5/32 file
Check with your mower shop where you get your chain from

Read Full Q/A … : Garden

I cannot save file because every time i will try to save there’s a notice saying my usb is write protected.
ANSWER : Listing under chain saws is not going to get you any answers

Read Full Q/A … : Garden

What size file for a 20 in. saw ? – Husqvarna Chain Saw 20" Bar
ANSWER : 3/8 chain uses a 7/32 file, and .325 chain uses a 3/16 file, unfortunatly both are available in 20″.

Read Full Q/A … : Garden

How to reset the timing on a 6.5 HP honda – Honda GX200-RH2 22mm Shaft 2 to 1 Gear Reduction 6.5 HP Engine
ANSWER : Good question first you need to find top dead center.if you cant find any marking on cam shaft remove spark plug. place thumb over hole and gentle pull motor over first will be suction next you will feel compression agaist your thumb this will be the power stroke as you pull motor over note when you first feel this and when this stops .this will give you a ball park idea of TDC.align the ignition system to fire here

Read Full Q/A … : Garden

What size sharpening file do i need – Poulan 18" Wild Thing Chainsaw
ANSWER : If you are running 91vg chain which is what should be on the wildthing. You need a 5/32 round file.

Read Full Q/A … : Garden

How to set timing before fitting the injection pump for john deere engine 4045 TF120
ANSWER :

Read Full Q/A … : Garden