22″ Yard Machine Push Mower

I cannot find the drain plug on my mower
Experienced gardeners share their insights in answering this question :
Beneathe the mower deck maybe?

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Using the Oil Drain Plug

If your engine is equipped with a drain plug, it would be located under the lawn mower deck. Look carefully as the drain plug may be obstructed by clumps of turf or debris, the belt guard or the mower blade (use caution when moving the blade).

You should be able to see and reach a large nut or plug located under the oil pan at the bottom of the engine (see Figure 13-6). This is the oil drain plug.
One way to remove the gas is to use either a hose to siphon off the gas or a baster/pipette to remove the gas from the lawn mower gas tank to a gas can. Alternatively, the fuel line connecting the fuel tank to the carburetor can be disconnected at the carburetor and fuel emptied into a gas can.
The recoil starter is the pull-start mechanism on the back of the engine that enables you to start your snow blower or lawnmower. The starter cord is also called a starter rope.
Your car`s oil drain plug has a very important, if often underrated job. The plug, which sits at the bottom or side of the oil pan, is charged with keeping your motor`s vital life blood — its lubricant — from pouring out due to the constant effects of both gravity and the pressure that`s generated inside the crankcase.
Stoppers: Many bathroom sinks have a drain that can be closed to keep water in the basin. These are called stoppers, and they include a fitting that goes inside the drain and a lift rod to raise and lower the stopper valve.
One way to remove the gas is to use either a hose to siphon off the gas or a baster/pipette to remove the gas from the lawn mower gas tank to a gas can. Alternatively, the fuel line connecting the fuel tank to the carburetor can be disconnected at the carburetor and fuel emptied into a gas can.
The oil drain plug is a screw plug made of metal or plastic. The oil drain plug with sealing ring seals the drain opening. This opening is needed to drain waste oil when changing the oil before refilling.
One way to remove the gas is to use either a hose to siphon off the gas or a baster/pipette to remove the gas from the lawn mower gas tank to a gas can. Alternatively, the fuel line connecting the fuel tank to the carburetor can be disconnected at the carburetor and fuel emptied into a gas can.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Can not locate the drain plug.
ANSWER : IT IS ON THE BOTTOM OF THE MOTOR AND WILL BE A ALLEN TYPE PLUG .. CLEAN OFF THE BOTTOM OF THE MOTOR YOU WILL FIND IT

Read Full Q/A … : 22″ Yard Machine Push Mower

Where is the oil drain plug – Troy Bilt 5.5hp Self Propelled Mower
ANSWER : You probably dont have one!

The best way to drain is to warm up the engine *(to suspend the dirt and metal and get the oil flowing) Then tip the mower to the side with the oil filler with the dipstick removed. The oil just pours out!
Get a dog dish sized bowl and catch the waste oil for disposal.

Good luck and be careful!

Read Full Q/A … : 22″ Yard Machine Push Mower

Does the zoom 34″ zero turn have an oil drain plug? if so, where is it located?
ANSWER : Some of the newer engines have a oil drain that you turn a quarter of a turn that it drains look at the bottom of the dip stick tube

Read Full Q/A … : 22″ Yard Machine Push Mower

Oil change plug location
ANSWER : Thet drain plug is in the end of a black tube on the r/h side od the crankcase

Read Full Q/A … : 22″ Yard Machine Push Mower

I need the spark plug gap for an Ariens ST624E. the spark plug = 21533500
ANSWER : The recommended setting is .030″

Read Full Q/A … : 22″ Yard Machine Push Mower

Where are the oil drain plugs for a poulan pro 550 model
ANSWER : Under the deck above the blade. It is probably a square head pipe plug

Read Full Q/A … : 22″ Yard Machine Push Mower

What is the spark plug gap for a NGK BPM8Y – Echo Cs-400 Chainsaws
ANSWER : 20-25 thou which is around 0.6mm

Read Full Q/A … : 22″ Yard Machine Push Mower

I need the spark plug gap for a MTD mower model # 11A038A729. It has a Briggs 12M902 0451 E1. Thanks.
ANSWER : The proper gap is ..030″ Here is the Briggs application chart for L-Head engines like yours.
http://www.manddsmallengine.com/briggs/info/plug7.html

Read Full Q/A … : 22″ Yard Machine Push Mower