must be this far from fence between us and neighbors.
Garden

Experienced gardeners share their insights in answering this question :
Hi, One inch equals 2.54 centimeters. So, 1.5 meters = 150cm, 150cm/2.54 = 59inches
1 foot equals 12 inches. So, 59/12 = 4 feet and 11 inches or roughly 5 feet.
Hope this helps.

## How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Inches to Feet Conversion Formula

Thus, 1 inch is equal to 1 12 = 0.0833 feet approximately. Thus, to convert inches to feet, simply multiply the length in inches with 0.0833. To convert inches to feet, simply divide the length in inches by 12.

Converting Feet & Inches to Centimeters or Meters

For example, a 5-foot-8 person would be 5 x 0.3048 = 1.524 meters (from feet) and 8 x 2.54 = 20.32 centimeters (from inches). Add the two results (1.524 + 0.2032 = 1.7272 meters) to get the total height in meters.

How do you measure 1.5 meters? So, you can either convert 1.5 metres to centimetres or inches to locate it on a tape measure. 150 centimetres are equal to 1.5 metres times 100. As seen in the illustration below, 1.5 metres are located at the 150-centimeter mark on the tape measure.
1.5″ = 0.0381 m

To convert the units you have to multiply the imperial and US customary unit of length by 0.0254. The result of the multiplication, 0.0381 meters, is the height, length or width in the base unit of length in the International System of Units (SI).

The formula to convert the length or height given in inches into its equivalent centimeter is given by; The value of 1 inch is approximately equal to 2.54 centimeters. To convert inches to the centimeter values, multiply the given inch value by 2.54 cm. 1 cm = 0.393701 inches.
1 metre is equal to 3.28 feet, while 1 foot is equal to 12 inches. From the statement above, it is clear that 1 metre is equal to 12*3.28 inches. On multiplying, it turns out that 1 metre is equal to 39.36 inches. Multiply the given distance in metres with 39.26 to get the equivalent length in inches.
One meter is approximately equal to 39.3700787402 inches.
To convert the value of length from centimeters to foot with inches, follow the below steps: Step 1: Convert cm to inches: Divide the length value by 2.54. Step 2: Now divide the obtained value in step 1 by 12 to get value in feet.
1.5 m = 59.05512″

The result of the division, 59.05512 inches, is the height, length or width in the imperial and US customary unit of length.

5 feet 1 inches in cm = [(5×12)+1] x 2.54 = 61 x 2.54 = 154.94 cm.

How do i convert board feet to square meter – Arrow Woodview Shed 10' x 14'

Read Full Q/A … : Garden

How many cubic feet of soil do i need for a hole 18 inches in dimeter by 18 inches deep
ANSWER : Sorry about the reply I gave you. I had the right formula but my answer was way off. Using the V = Pi r 2 h , the answer should be approximately 7 cubic feet. Again, my apologies.

Read Full Q/A … : Garden

HOW DO i CONVERT 42″ X 30″ X 12″ TO CUBIC FEET
cubic ft 12x12x12=1728 cubic inches
15120/1728=8.75 cubic ft
that is just .25 cubic from being 1 cubic yard

Read Full Q/A … : Garden

I am trying to convert 1.5 meters into feet and inches , hopefull you can help me and thanks in advance as I am putting across a flat roof and must be this far from fence between us and neighbors.
ANSWER : Hi, One inch equals 2.54 centimeters. So, 1.5 meters = 150cm, 150cm/2.54 = 59inches
1 foot equals 12 inches. So, 59/12 = 4 feet and 11 inches or roughly 5 feet.
Hope this helps.

Read Full Q/A … : Garden

How do I calculate area covered?
ANSWER : Forget the bags-too expensive

Have a yard or two delivered from a
local building supply or borrow a pick up
& go get it

Read Full Q/A … : Garden

Enigine smokes after 15 minutes use, blue smoke
ANSWER : The piston rings are probably worn in the motor.

Read Full Q/A … : Garden

Makita 5012B 12” Electric Chain Saw file size says it is part #744003-1. What is the equivalent in mm or inches for a metal file?
ANSWER : .325 chain takes a 3/16 file
91 chain takes a 5/32 file