Husqvarna

I replace the cable from the handle to the pulleys, but it is too loose to engage the pulleys/belt. Where can I get info on how the cable is supposed to be routed?
Experienced gardeners share their insights in answering this question :
Its pretty straight forward to fit the cable, if it is not pulling the jockey hard enough into the belt it is more likly the belt is incorrectly fitted or has stretched.

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Product Details. Stens Clutch Cables keep tractors and riding mowers working smoothly and flawlessly. This cable provides the connection between the transmission clutch linkage and the clutch pedal mechanism.
Most lawn mower blades rotate in a clockwise direction (counter-clockwise when viewed from below), and as such have the cutting edge on the right side. If you are unsure of how your mower rotates, check the position of the discharge chute; if it is on the right side angled back, the blade turns clockwise.
The curved wing at the end of the blade should point towards the deck. The cutting edge or smooth side of the blade should face towards the grass side.
Checking the cable

Move the clutch pedal by hand. You should be able to feel whether the cable slides smoothly. If it does not, the cable may be bent at too sharp an angle by being wrongly routed. Usually there are guides to keep its path smoothly curved.

Pushing in the pedal pulls the steel cable, which is covered by a heavy sheath, and the cable extends to disengage the clutch and let the driver smoothly shift gears.
Most lawn mower blades rotate in a clockwise direction (counter-clockwise when viewed from below), and as such have the cutting edge on the right side. If you are unsure of how your mower rotates, check the position of the discharge chute; if it is on the right side angled back, the blade turns clockwise.
The curved wing at the end of the blade should point towards the deck. The cutting edge or smooth side of the blade should face towards the grass side.
Do lawn mower blades turn clockwise or counterclockwise? If you are visualizing from above the engine and deck, they turn clockwise. If you are looking from the deck when it is upside-down, they turn counterclockwise.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Mower jerks when going up an incline. – Husqvarna Riding Lawn Mower 46 Cut Kohler Yth21k46
ANSWER : Belt spilling

Read Full Q/A … : Husqvarna

How do i tighting a belt on a husqvarna riding mower YTA19K42
ANSWER : Ask you grandson

Read Full Q/A … : Husqvarna

How do i add transmission oil – Ariens Lawn Tractor 46"" Riding Lawn Mower 936053"
ANSWER : Should a plug or cap on top of transaxle.

Read Full Q/A … : Husqvarna

Husqvarna slow in reverse
ANSWER : Check the linkage and make sure that it has full travel

Read Full Q/A … : Husqvarna

Mover has no power getting to it all of a sudden.
ANSWER : If the battery is good check the battery connections are clean and tight.

Read Full Q/A … : Husqvarna

How do I by-pass safety switches onyth24k48
ANSWER : Unplug them or install a jumper depending on the electrical circuit design.

Read Full Q/A … : Husqvarna

How to unlock motor on husquavarna mower – Husqvarna Lawn Tractor 48" Deck, 23 Hp, Model# Yth2348
ANSWER : I’d love to help but don’t know what you mean by ‘unlocking’ the motor?
Jurgen

Read Full Q/A … : Husqvarna

Starting will not start
ANSWER : Pull the air cleaner and check for obstructions, dirt, oil etc. Leave off and try to start. Check plug for oil or wetness from fuel. Have a spare handy to check for spark. A shot of instant start into the air cleaner housing might help if the mower has bad or old fuel. You should drain the fuel out if it over a month old and unpreserved. Also, if the mower has been sitting with fuel in it the main jet sometimes gets clogged up due to todays alcohol enhanced fuels. You should get some help with removing the main jet and cleaning it out.

Read Full Q/A … : Husqvarna