Husqvarna

The serial tag fell off of the saw, is there any other way I can get the serial number and/ or year?
Experienced gardeners share their insights in answering this question :
Make a picuture!

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

On the left side of the chassis, near the engine.
Lawn Tractor Model & Serial Numbers

The Husqvarna model number, part number, and serial number can be located on a sticker on the frame under the seat. Lift the seat forward to access the sticker.

The serial number, product number and other product data are found on the rating label on the mower. Check the operator`s manual for information on where the rating label is located on your product.
The majority of serial numbers are located under the bottom bracket where the two pedal cranks meet. Turn your bike upside down and record the number. If there is no serial number near the cranks, you should check other common places including the front headset or rear stays.
A serial number (SN) is a number assigned to each individual product in order to distinguish that product from all others.
Hydropower was required in the manufacturing process, so in 1689, a drilling works was established beside the water falls in Huskvarna, southern Sweden (at that time spelled Husqvarna), where many products are still produced today.
Finding your model number and serial number is as easy as locating the identification tag on your machine. As seen in the example, the model number will be displayed below the MODEL heading (Example: Z235), and the serial number will be underlined on the top-right corner of the tag (Example: 130002).
Every lawnmower, engine and appliance has a specific model number and serial number. This is like the VIN on your car. It is the secret number to discover all the parts and accessories that are unique to your product.
For chainsaw models 340, 345, 350, 351, 353, 346XP, it`s located on bar side of the saw, under the handle.
Yes, tractors do have a VIN. The Vehicle Identification Number (VIN) is a unique alphanumeric code that identifies a vehicle uniquely in the United States and Canada. When you purchase your tractor, the dealer will include it on their paperwork and give it to you when they hand over your new machine.
THE BASIC CRAWLER SERIAL NUMBER PLATE IS LOCATED ON THE BATTERY BOX FRONT PLATE. THE PRODUCT IDENTIFICATION NUMBER PLATE IS LOCATED ON THE BATTERY BOX FRONT PLATE.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Have spark wont start – Husqvarna Chain Saw 18" 450 Model 966955438
ANSWER : If there is a good spark at the plug, it can be one of two things, either the piston has picked up in the cylinder ( remove the muffler and check the condition of the piston skirt through the exhaust port ) or there is no fuel getting the the plug ( replace the fuel filter in the tank )

Read Full Q/A … : Husqvarna

Husqvarna 350 saw chain oiler not working , possible solutions . thanks Ken
ANSWER : Remove the chain and cover holding it and check the hole that the oil comes out is not blocked by sawdust.

Read Full Q/A … : Husqvarna

Have a 266 se husqvarna, serial number 7330498. what year is it?
ANSWER : First digit is the year of manufacture in a ten year rotation, so it should be a 1987 machine, as they were not produced in 1997, the next two numbers are the week number.

Read Full Q/A … : Husqvarna

Oiler is not working on 450e. – Husqvarna 450 e-series 18" Chain Saw
ANSWER : Remowe right cap and cutting blade clean the oiler. If dont help check oil tank and clean it check oil tank cap teher must be air inlet is it clean.

Read Full Q/A … : Husqvarna

My husqvarna chainsaw serial # is 830440393. I want to order parts but I don’t know what model I have. Please help.
ANSWER : Hi,You can find your model number at the same spot that the serial number and brand name are. You have to know the model to get parts. Here are a couple of sites I like to order parts from for mine.http://www.milacalawn.com/parts.asphttp://www.partstree.com/parts/?lc=husqvarna&gclid=CLOgoraftKgCFQbCKgodhmF1AQHope this helps. If it does, I’d appreciate a 4 thumbs up. Thanks for visiting fixya.com\Handie Andie

Read Full Q/A … : Husqvarna

Husqvarna 450 e-series 18″ Chain Saw will not
ANSWER : Is this machine mechanically sound, remove the muffler and take a look at the piston through the open exhaust port, any signs of scuffinf or damage to the piston skirt and the saw will have to come apart for further investigation.

Read Full Q/A … : Husqvarna

Chainsaw ran out of gas. Filled tank will not start now. Husqvarna 450 e=series 18″
ANSWER : Those saws are very finicky. First shake the saw very vigorously, as the saw running dry mayy have sucked dirt to the intake screen. Clean the plug and check gap. Prime, choke and pull till it starts. your plug may be foulled, this happens alot when a saw leans out from running out of fuel.

Read Full Q/A … : Husqvarna

Husqvarna 240 want start at all – Husqvarna Chain Saw 18" 450 Model 966955438
ANSWER : Sounds like the ignition module or spark plug. The ignition module is what controls the spark plug that gives your saw the firing capabilities. Before you purchase one of those, replace the spark plug and see if that works. The 240 is a newer husqvarna; so I am skeptical to say it is the ignition module. However, any new product can have a bad part on it. Your saw may have gotten flooded and won’t start. Make sure your gas mixture is 50/50 gas to mixing oil. Always use fresh gas. If you make up gas and don’t use a whole gallon at a time, put some fuel stabilizer in the mixture; so it will still be fresh the next time you use it.

Read Full Q/A … : Husqvarna