Oil pump not oiling bar
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
The most common reasons why your automatic oiler isn`t working are: Your chainsaw`s oil tank is empty. The chainsaw oiler is clogged. The oil pump is broken.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
My husky 455 rancher is not oiling the chain properly. I have tried to clean all the oil ports on the bar and saw but it still is hardly pumping any oil to the chain. What could be the problem? How does the oiling system work?
The problem is very likely to be a clogged but more likely faulty internal oil pump (especially if your chainsaw is old).Hope it helps.
Husqvarna rancher, leaks oil when saw is off. where rubber hose meets pump, seems to fit together well but still leaks out. drains full tank of oil. any fixes or better parts.
The hose is leaking. You will have to replace the hose. You do not have to disassemble the saw in half as many seem to think. Just some of the parts that are in the way. You can insert a wire and pull the hose out from the oil tank along with the filter. It goes in and you remove only the parts that are in the way where the hose comes out.
I have a 345 chainsaw. my oil pump will not supply oil to the bar.the oil case vent is clear. the oil case filter is clear. the oil passage to the pump area is clear. the oil pump rotates.the line from the pump to the bar is clear. the hole to bar is clear my assumption is that the pump is defective!!!!!! thanks
It can be defective. Or not right installed.
How to adjust oil flow to bar on husqvarna 51 saw
The 51 does not have an adjustable oil pump.
How to adjust oil flow on husqvarna 235e
I dont think you can on this model. I think its permenantly set. However, depending on the season you can get ‘thicker’/’thiner’ chain oils.
What is the longest bar that will fit on a husqvarna 350 chain saw
Longest bar is 20″ the oil pump will be on the limit with this.
Husqvarna iz4817 change oil light needs to be reset
The oil change reminder will flash at 49 hrs for 2 hrs then reset itself. It will do this every 50 hrs.
Pump was clogged it was taken apart to be cleaned and the oil spilled out. what type of oil is used in a 1/4 hp sump pump
10 wt. non-detergent/non-foaming oil.