17 in Hedge Trimmer

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

When the hedge trimmer is used extensively or in a wrong way, the blade can become blunt which makes the product useless. Replacing the blade without care can be dangerous, especially when handling sharp blades. This guide could also be used on how to remove the blade in case of maintenance.
The dual action blades have a length of 200mm and can trim bushes, shrubs and grass in straight cuts or shape curved surfaces such as hedges. Easily swap the blade in and out of the tool with tool-free installation.
Simply unscrew the two screws on the back of the trimmer, gently remove the old blade, replace with new one, and reinstall screws into machine. Make sure blades are aligned properly before turning on machine. Improper alignment may cause injury.
To take off the nose trimmer or detail trimmer head, firmly grip the handle of your device, hold the attachment, and turn it counterclockwise, until the “^” triangle indications on the handle and the head are aligned. Then just pull the attachment off.
Over time, all blades eventually dull and need to be sharpened for optimal performance. Your hedge trimmers are no different in this respect. Regardless of whether you use them sparingly or often, you`ll need to sharpen them.
Over time, all blades eventually dull and need to be sharpened for optimal performance. Your hedge trimmers are no different in this respect. Regardless of whether you use them sparingly or often, you`ll need to sharpen them.
Can hedge trimmer blades be sharpened? Hedge trimmer blades can be sharpened by hand, and it is recommended that you do so regularly: the job needs a flat file, a whetstone and a little careful attention.
With a severed cord, your hedge trimmer is virtually worthless. With a small amount of money and a little ingenuity, however, you can repair the cord and have the trimmer running. If the cord left attached to the trimmer is long enough to be useable, then you simply can add a new plug to its end.
With a severed cord, your hedge trimmer is virtually worthless. With a small amount of money and a little ingenuity, however, you can repair the cord and have the trimmer running. If the cord left attached to the trimmer is long enough to be useable, then you simply can add a new plug to its end.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Blades wont move when power connected. Stripped it down. Motor is fine. I think it must be the gears attached to the blade unit
ANSWER : Either the gears, OR SOME machines have a “CENTRIFUGAL CLUTCH” [a safety feature] between the engine and the blades.

IF your machine has this feature, then it’s possible that the clutch has worn out and is slipping so badly that the blade won’t move.

Read Full Q/A … : 17 in Hedge Trimmer

How do you sharpen the hedge trimmer. It is the homelite handy hedge 2.7 17 inch blade
ANSWER : DREMEL STONE WORKS THE BEST. THEY SUGGEST TO REPLACE BLADES

Read Full Q/A … : 17 in Hedge Trimmer

Not cutting properly. blades seem to be out of sync.
ANSWER : Hi
try to spray oil the blades
if not helping
take the machine to be seviced you might need to sharpen the blades.

Read Full Q/A … : 17 in Hedge Trimmer

Baldes locked up – Remington At3017b Hedge Wizard
ANSWER : Ensure blades are sharpened. If there are burs on blades they can seize.Blades should be lubricated with WD40 , waste oil or other lubricant.The bolts holding the two blades together shouldn’t be too tight.

Read Full Q/A … : 17 in Hedge Trimmer

Blade moves back and forth,but won’t cut anything
ANSWER : Check the bolts or screws holding the blades together are tight but not so tight that they cant move. Ensure blades are sharp.

Read Full Q/A … : 17 in Hedge Trimmer

How to sharpen stihl gas power trimmer
ANSWER : Sharpen with a flat file. Its a long process as each tooth has 2 cutting edges. There are companies that will do this properly at cost.

Read Full Q/A … : 17 in Hedge Trimmer

Engine runs great, accelerator responds perfectly, but the blades stopped moving. Any ideas?
ANSWER : Ensure blades are sharpened. If there are burs on blades they can seize.Blades should be lubricated with WD40 , waste oil or other lubricant.The bolts holding the two blades together shouldn’t be too tight.

Read Full Q/A … : 17 in Hedge Trimmer

How to change blade assembly on hedge hog 22 – Black & Decker 22 In Dual Action Hedge Trimmer
ANSWER : Are your blades dull, they can be sharpened. There is a good video on youtube by ereplacementparts where he shows you how to do it with a file and with a grinder.

Read Full Q/A … : 17 in Hedge Trimmer