28cc Gas Line Trimmer
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
The universal attachment works with most brands of attachment-capable trimmers. This edger attachment makes it easy to clean up the lines on your sidewalks and driveways to a professional standard. The large rubber flap protects the operator from debris, and the large guide wheel makes edging easy.
Twitter header dimensions should be 1500 x 1500 pixels. Leave enough space at the bottom left for your profile picture, which is 400 x 400 pixels, and keep in mind that part of your photo is usually cropped to fit the banner.
The difference between the Husqvarna 128LD and the 128LDX trimmers is the size of the shaft and the attachments that the units can accept. These attachments can not be interchanged between the 128LDX and 128LD.
Almost any trimmer head can be made compatible to almost any trimmer with the right arbor bolt adapter. Bolt adapters can change any or all of the four trimmer head arbor bolt specifications. That is to say they can convert between diameters, thread sizes, gender, rotational direction, and any combination of the four.
There are different kinds of string trimmer heads, and they can make or break your yard work experience.
change your trimmer head is because after a while once it gets worn down too much it`ll then struggle to feed your trimmer line. you may begin to notice this problem when you start to bump. against surfaces or it`s extremely hard for it to feed more trimmer line out have a look at.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
My husqrvarna trimmer head keeps binding up and wont turn. how do i fix this problem?
String wont come out? or head not turning?
I need to replace the whole trimmer head and I dont know how to get the gear case off so I can put the new one on. Can anyone help?
To replace the trimmer head you don’t need to replace the gear case. If you look closely about a 1/4 inch up from the safety guard you’ll see a hole in the side of the “gearcase” assemby. (you may have to clean the old dead grass clippings off to see it) You can shove a rod into the hole that will stop the head from spinning freely and I believe you spin the head clock wise (reverse threads) to remove the head.
How do you load the trimmer head… Lost the user manuel
Check out the manual (available under the technical documents section of the Echo webpage, or at http://www.echo-usa.com/documentation.asp?Model=SRM-210&lang=E )and it will tell you how to change it.
Can not get spool head apart to change line, tried pump pliers, pipe wrench, won’t unscrew!!
If you are sure that it screws on it may be a reverse threaded unit..
The head won,t turn – Craftsman 25cc Gas Line Trimmer
You will need to pull the head off, as it sounds like the cable is off. there should be four bolts/screws, there maybe some in the middle also, gently remove the head(this is the top of the trimmer where the pull cord is, once you have it separated you can turn the cable by hand and the line feeder should rotate, if it does then look inside the head and make sure it is still square and not rounded. or you can pull the line feeder off and pull the cord and see if the cable rotates, whichever you feel comfortable with trying. Good Luck Tim
Trimmer head line loading instruction – Husqvarna 28cc Gas Line Trimmer
1. Remove the cap on the trimmer head, it unscrews.2.
The spool comes off, and on the inside of the spool there is a small
hole, this is where you will start your trimmer line. It it will hold it
in place while you wrap it. There is also arrows on the spool showing
the direction that you need to wrap your spool.3. Insert the
line in the hole and start to wrap the line in the directions of the
arrows, try to keep the line in rows, or else the line may bind and you
will have to do it all over again.4. Feed the line through the
retainer and reinstall the spool by lining up the retainer and the slot
on the outside portion on the trimmer head, the screw back on the
trimmer head and you will be ready to trim.
Shaft disengages and trimmer head stops spinning. Seems to be disengaging at coupling were attachments hook up. Shaft slides back and forth and when I turn trimmer off and jiggle trimmer then start it back up it works for a while then stops.
Something wrong with your cintrifical force clutch . it is problably set too loose so the the shaft wont engage
Need to know how to wind trimmer line on trimmer
Depends on the trimmer, all heads are different. However, the majority of trimmers are wound as follows:
1. pop the top cover off the head, pull the spool out. It will be either single or double lined, they will be wound counter clock wise.
2. the end of each line goes out each of the seperate holes
3. slide spool back on and replace cover