Black Max 2600 PSI Pressure Washer

I do not see a drain plug to drain the old oil in order to do an oil change

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

A pump oil change should be done every 3 to 5 months to keep equipment running smoothly, safely and efficiently. The high pressure pump inside a hard working pressure washer is literally the heart of the machine. The purpose of the pump is to produce the water pressure which enables you to do the task at hand.
Overfilling oil may cause smoking, hard starting, spark plug fouling, and oil saturation of the air filter. Do not run the pressure washer before connecting and turning on the water supply failing to do so will result in damage to the pump.
The answer is yes. Using medium to heavy-duty commercial pressure washers can remove oil stains and dirt from your asphalt driveways and parking lots.
Experts advise doing an initial oil change after the first 50 hours of pump use. After that, change the crankcase oil every 3 months or after every 500 hours of operation, whichever comes first. High pressure plunger pumps require a specially formulated oil; otherwise regular pump oil is appropriate.
The answer is yes. Using medium to heavy-duty commercial pressure washers can remove oil stains and dirt from your asphalt driveways and parking lots.
Overfilling oil may cause smoking, hard starting, spark plug fouling, and oil saturation of the air filter. Do not run the pressure washer before connecting and turning on the water supply failing to do so will result in damage to the pump.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

My Honda 2600 psi power washer will not pull to start. It was running great then I allowed the neighbor to borrow it. He ran the washer till it was out of gas and proceeded to refuel and at this point it would no longer start. The pull cord is out about 4-6 inches out and I am concerned about taking the casing off myself.

Fearing that it may throw more off on the unit. If i take the casing off are there any spring loaded parts that will dismount?

What should I do? Spark Plug? Turn wrenches?

Please let me know

ANSWER : You should be fine to take the recoil off, there shouldn’t be anything that shoots out at you. You might want to check the oil level on the engine, many of the Honda engines won’t start unless there is enough oil in them. If your oil level is fine, check to make sure that your motor is getting spark.

Oil appears to have come out of the oil filler cap. Is this a sign of overfilling the oil, or something else?
ANSWER : Id definitley say its over filled. try checking the dipstick

Honda gcv160 wont dispence detergent – Craftsman 2600 PSI Honda Powered Pressure Washer
ANSWER : It will not draw soap while using pressure take out the nozzle or use the large black nozzle

What type of motor oil – Honda Black Max 2600 PSI Pressure Washer
ANSWER : 4-Cycle Engine Oil (SAE 30 or SAE 10W30)

Here is a link to the owners manual, should you need it.

http://www.blackmaxtools.com/product_manual/file_url/6/BM80913_485_trilingual.pdf

Got spark and gas can’t get it running what is the conpression supposed to be
ANSWER : I have a honda power washer EXHA2424, I replace new spark plug, new gas., cleans the cabureetor, and it still won’t start please advice me what to do

What kind of soap do I need to use? – Honda Black Max 2600 PSI Pressure Washer
ANSWER : I suppose that would be dependent upon what you would be cleaning eh?If moss on white siding use a bleach solutionOtherwise for general cleaning I prefer “simple green” — you may cut it up to ten times with water….Best regardsCk

What type of oil is needed for a Honda GC160 Power Washer? Honda 2500 PSI x 2.3 GPM.
ANSWER : The type of oil recommended for that engine is SAE 10W-30 and the capacity is 0.61 quarts. This and more can be referenced at the website at the end of this solution. I was able to find the owners manual of your particular engine. http://www.northerntool.com/downloads/manuals/60594.pdf?cm_re=Product%20Page-_-Manual-_-Side

Changing engine oil on a gx390 engine for pressure washer excel
ANSWER : On the very bottom of the motor is a square plug to drain the oil. The machine must be elevated to allow the oil to flow into a drain pan. If you don’t see a square plug then look for a small 1/4 inch tube coming from the bottom of the crankcase with a hex cap on the end of it. If you cannot find either of these, then you must turn the pressure washer on its side and drain it through the same plug you fill from.