Garden
Experienced gardeners share their insights in answering this question :
I am assuming you are asking because you have a CLIC system.Bosch uses a tool-less blade changing system for its jigsaws that it calls “Clic.” The system makes changing blades fast and simple. With the simple blade changing you get with the Bosch jigsaws, it is no problem to change out a dull blade.REMEMBER: SAFETY FIRST LAST AND ALWAYS!!!
Make sure the saw is unplugged or the battery is removed.If you have a blade in there:
Hold the saw over a work bench and push the ejector lever to the center of the front of the saw. There is a center stop; you will feel it. The blade will eject and fall out
Insert the new saw blade into the plunger until it latches into place. The teeth should face toward the front of the saw. The back of the blade should rest in the groove of the guide roller. The plunger and the guide roller are between the body of the saw and the plateIf the blade will not go into the plunger, check the positioning of the slots in the blade. They should be at the top. Push the ejector lever and try again.
Give the blade a yank to check that it is firmly seated. Plug the saw back in or replace the battery and proceed with the cutUse protective gloves when handling blades. They can be sharp and can be HOT.I hope this helpsPlease rate FIXYAThanksCharly
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
Press down on the saw`s arbor-lock button and rotate the blade until the locking mechanism engages. Use the blade wrench to remove the arbor nut holding the blade in place. To loosen the nut, turn the wrench in the same direction as the blade cuts. Retract the saw`s upper blade guard and remove the old blade.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
How do I install on 2012 VW Passat? – Bosch 424A ICON Wiper Blade 24 Pack of 1 24"
ANSWER : Read the directions that comes on every package when purchased
The edger is not cutting very well. Any tips to make it work better?
ANSWER : You said cutting, not running, so I suggest removing the blade and sharpening on a grinder or buying a replacement blade.I hope you find this very helpful.
Charger stopped working only continuous green light shows
ANSWER : That means full charge I believe .
I need to get the blade of the lawn mower sharpened.Any tips on how to disconnect the blade fropm the lawn mower?
ANSWER : There is a jig that you can buy that makes this job SO much eaiser. It is a universal jig that clamps onto the deck and keeps the blade from spinning so you can use a ratchet to remove the nut holding the blade on. One name brand is called a “Blade Hog”. You should be able to find one of these at one of the bog box hardware stores.
Hope this helps,
Chad
How to change mower blades – Cub Cadet Riding Lawn Garden Tractor 25hp Kohler 50"
ANSWER : Fine a way to stop blade from turning, put a socket with long handle and turn countercock wise, some will need a wench on nut at top of shaft to stop blade from turning, torque to 60 # on most 50″ or lower width mowers
I would like to replace the mulching blades on my Sears Craftsman riding mower with regular cutting blades. I can find plenty of sources for new mulching blades, but not cutting blades. My mower is a model 917.259541 tractor and the blades currently on it are part #134149. I want to make sure I get the right size to replace them. Also, is there a source for a bagging system for this mower, that won’t cost as much as one from Sears?
ANSWER : The straight blade for the 42 inch mower is 138971.They cut better and are easier to sharpen and you will need them if you use a gass catcher. If you do not want to use sears for parts you may be able to find good deals on ebay.
How to change blade assembly on hedge hog 22 – Black & Decker 22 In Dual Action Hedge Trimmer
ANSWER : Are your blades dull, they can be sharpened. There is a good video on youtube by ereplacementparts where he shows you how to do it with a file and with a grinder.
Need parts list for Stihl FS 75 trimmer – Oregon Scientific Complete Carburetor for Stihl 4122 Brush Cutter and 4226HS Hedge Trimmer
ANSWER : Look at your local lawn and garden place some times they have extra parts that you can use for your trimmer. Or call the company them selfs and ask them if they have parts.
