Poulan

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Use a 40:1 two-cycle oil mix ratio. One gallon of gasoline combined with 3.2 oz of two-cycle engine oil. Unsure of the age of your equipment?
The fuel and oil mixture should always be 2% (50:1).
Mixing Ratios

Use the below as a guide for creating your mixture: 1 gallon of gasoline + 2.6 fluid ounces of oil.

You want to mix 2.6 ounces of oil to one gallon of gasoline for a 50:1 mixture. If you`re mixing up two gallons of gasoline you will have to mix 5.2 ounces of oil to two gallons of gasoline for a 50:1 mixture. I would recommend using fresh gasoline that has an octane rating of 89.
Mix at 50:1 (20mls oil per 1 litre fuel) when you`re using STIHL 2-Stroke oil. To prolong the life of your 2-Stroke fuel mix you can add STIHL fuel stabiliser to extend the fuel`s shelf life up to 12 months. 15ml of STIHL fuel stabiliser will treat 5 litres of fuel.
1:25 = 1 part oil + 25 parts petrol, or 40 ml oil per litre of petrol when using other brands of oil. Any two-stroke engine oil you use in your petrol gardening tool must have the TC classification.
For a 40:1 mixture, use 3.2 fluid ounces of oil per gallon of gas.
If you are unsure 40:1 is a middle range 2 stroke fuel ratio. This equals 25mls of two stroke oil to 1 litre of petrol.
1:25 = 1 part oil + 25 parts petrol, or 40 ml oil per litre of petrol when using other brands of oil. Any two-stroke engine oil you use in your petrol gardening tool must have the TC classification.
For a mixing ratio of 1 : 50 you need 5 litres of petrol and 0.10 litres (100cm³) of STIHL two-stroke oil.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

I need the gas mix oil ratio for the Poluan Pro 42…
ANSWER : 40:1 gas to oil ratio.

Read Full Q/A … : Poulan

Is it straight gas or mixed? – Poulan Pro 14" Gas Chainsaw 33CC P3314
ANSWER : It uses a gas/oil mix. 40:1Hope this helps.

Read Full Q/A … : Poulan

I put oil in gas and gas in the oil can it be fixed
ANSWER : YES IT CAN. TAKE OFF BOTH CAPS AND TURN THE SAW OVER AND EMPTY THE TANKS. GO TO AN AUTO PARTS STORE AND BUY A GOOD DEGREASER THAT YOU CAN SPRAY IN THE TANKS AND WASH CLEAN. WAIT TILL DRY AND REFILL HTE RIGFHT WAY.

Read Full Q/A … : Poulan

Pp4218 stopped running abruptly. Can’t budge the starter rope.
ANSWER : Did you respected the GAS/OIL ratio? did it over heated? … from the sound of this, the engin is siesed (lack of lubricating or over heated) sorry i’m not an expert it is just a suggestionGood luck!

Read Full Q/A … : Poulan

How to put gas and oil in it.
ANSWER : It’s one fill of petrol to one cap of two stroke oil.
If you want to put in more, that is no problem, but it will smoke a lot!

Read Full Q/A … : Poulan

Can you adjust the oil pump – Poulan Pro 42CC 2 Cycle Chainsaw, 18"
ANSWER : Depends on the saw. If it is adjustable then it will be adjusted from the bottom of the saw. Most have a diagram on the bottom showing which direction to turn the screw

Read Full Q/A … : Poulan

Do I need gas and oil mix – Poulan Super 250a Chainsaw Plate
ANSWER : I think Poulan uses a 40:1 ratio to one gallon of gas, however I have always used 50:1 the same as my sthl saws with no issue. I would rather have more oil mix that to little.

Read Full Q/A … : Poulan

Poulan chainsaw 18″ 42 cc, pro gas filler cap?
ANSWER : Yep they swell after a while and will not screw in or out!
Sand the threads down so that the circumference is reduced with a course file or plumbers cloth, chamfer the threads a bit on the edges. A new one will do the same thing after a while so just fix the one you have.

Read Full Q/A … : Poulan