Pro PR550N22SH 22Inch Briggs Stratton 550 Series Gas…

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

On some mowers with Briggs and Stratton engines, the carburetor sits on and connects directly to the fuel tank. Since there is no fuel line, the gas should be removed from the tank using a siphon or baster. Honda mowers have fuel lines, which, when disconnected, can be used to drain the fuel tank.
Remove the cap and open the fuel tank. Insert the sucking end of your siphon pump into the tank and the bottom end into your gas can. Place the gas can close to the mower to minimize the chance of the hose slipping out and spilling fuel. Use the siphon pump to suck gas from the tank until it stops flowing.
Again, the name is very straightforward– a muffler delete is a process that removes the device from the exhaust system for various reasons. The process is very straightforward as well: the muffler is removed, a muffler delete pipe is installed in its place, and an exhaust tip is welded to the end.
A muffler`s primary role is to reduce sound, but it can also play a role in your car`s overall performance. An engine is able to generate more power, faster if it is able to get rid of all of the exhaust gases it produces quickly.
To determine if your muffler needs to be replaced, remove the muffler (while cold) and shake it; there should be little or no noise heard, and a limited amount of rust/debris coming from the inside.
Old and new gas should not be mixed for a variety of reasons, the major ones are; The old gas degrades over time it should not be added because it has already lost it`s combustibility. It can cause sputtering. It might fail to fire it up.
Common vehicles that are given muffler deletes or “straight pipes” Any vehicle can be straight piped. Any vehicle can have its muffler deleted- if it has one.
Description. This Muffler Bypass is also known as the G-Pipe, it replaces the end muffler on the passenger`s side nearest the exhaust tip. It is a great way to produce more power and sound.
The muffler delete can slightly (and I mean slightly) increase torque and horse power at high RPM. By removing the muffler the exhaust is more free flowing , allowing quicker evacuation of gasses from the cylinder. This in turn creates a stronger vacuum and slightly increase the air intake.
Straight pipes can refer to muffler deletes, but they can also refer to removing everything in the exhaust system that isn`t pipe. This includes resonators and catalytic converters. Keep in mind: it`s illegal to operate a vehicle on the street that does not have a muffler. Same goes for catalytic converters.
Straight pipes can refer to muffler deletes, but they can also refer to removing everything in the exhaust system that isn`t pipe. This includes resonators and catalytic converters. Keep in mind: it`s illegal to operate a vehicle on the street that does not have a muffler. Same goes for catalytic converters.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Mower stops when the blades are engaged – Toro Lawn Mower With Toro Power Tools
ANSWER : The clutch pully is binding

Briggs and stratton 17hp engine won’t keep turning over
ANSWER : Could be stuck shut valve

I have a 1996 toro 19 horse kohler engine when I change the oil how much oil goes back in
ANSWER : 50.75oz or 1.5 litre

Power drive won’t engage on Toro Model 20071
ANSWER : JUST SNAPS OFF

Can’t get my 2-yr.-old Toro Model 20086 mower to start. Last start was Feb. 6. Increasingly, it seemed to need more than the Toro ‘3-pump’ primer to start. I added stabilizer – no help.
ANSWER : The carb may be gummed up

My JS60 is also fouling plug…
ANSWER : The John Deere JS60 does not use any kind of fuel filter.Some of the newer ones had a thermal switch near muffler that would allow air vane to shut choke off when warm.Had a couple new out of box with choke not releasing or stuck half open.So if you have one of the newer ones your choke will not open until muffler gets hot,could be where the black smoke comes from.

I have a toro ccr 2450 and it seems like the auger is spinning but as soon as it gets into the snow (even light) it just jams (stops spinning) can you help
ANSWER : Printer carege problem

Carburetor tool i need to adjust my carb on my husky 455 chainsaw but it has a special adjusting screw. where can i get the adjustment tool.
ANSWER : The splined Poulan Carb Adjustment Tool, 530035560, which was readily available for less than $20.00 before 2013, has become scarce and bottom the feeders are price gouging. Check ecrater.com and curtschainsawparts.com. I just received one and it is the quality item at very reasonable price, $14.00