How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
There are three main reasons for a chain to come off: Incorrect bar and/or chain for the saw; check to be sure that you are using the proper chain pitch, gauge and number of drive links to match the guide bar. Chain not properly tensioned; It is normal for a new chain to stretch and require frequent adjustment.
Check for any debris around the bar and make sure it`s not worn down. If it is, you`ll notice that the rails are shallow. If that`s the case, it will need to be replaced. You will also want to make sure your chain oiler is in good order and that the chain itself does not have any broken teeth.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
I was using the saw as a chain saw last weekend to cut up an old tree stump when the chain came off. I don’t know how to access it to put it back on and don’t have a user manual. The saw belonged to my late father and I don’t know if he even kept the manual.
You will have to remove the cover on the side the chain bar goes into. There should be one or two nuts holding the cover on the side. The is also a chain tension adjuster you may have to loosen to put it back on. Make note of the direction of the teeth on the chain. It is an directional chain. The tension adjuster is usually a flat head screw on the front side right beside the chain bar.Unless it is a really old saw, manuals are available from most manufacturers for free download. See if you can locate a brand name and model number.
REMINGTON POLE CHAIN SAW
The chain has to be tensioned when replaced. You lift the chain away from the bar about halfway and the tangs that run in the bar should just almost come out of the groove. There is a screw that extends the bar near where it attaches near the sprocket. adjust that with the bar mounting nuts not quite tight till the chain is tensioned correctely.
Remington pole chain saw model 106890-02. Chain
We are in no way connected with RemingtonPower. They are no longer in production and replacement parts are very difficult to find. Often eBay is your only source of parts. Sorry. Lou
Saw just stop working doesn’t come on check switch looks good. have move then one saw and 2 have just stop running after a while of cutting. Neither where over heated. I have 3 saws 16″ 14″ and pole is the switch the same in all three brfore I take the working one apart. Help.
Did you try them directly in the outlet or with a different extension cord? Have you checked the outlet for the correct power? Did you try a different outlet? Provide model numbers for the bad saws and I will provide an IPL with switch part numbers. Reply below.
Are you aware RemingtonPower is no longer in production?
Need a replacement guide bar for a Model 106821 A Remington pole chain saw.
I found an operator’s manual but it doesn’t include an IPL. I wasn’t able to find any IPL for this item. I’d suggest you try the manufacturer here:
Is 10-30w car oil ??? Okay to use as the Oil on the Chainsaw Bar of a Remington Pole Saw Model 106890-02?
Car engine oil has not got a non fling addative so will just spray off the end of the bar and not lubricate the chain where it does most of its cutting, on the underside of the bar.
WHAT OIL DO I USE IN ELECTRIC REMMINGTON POLE SAW?
Bar oil–home centers, Walmart, saw dealers.
Where do I buy Pole saw parts – Remington Electric Pole Saw