Forest & Garden 125l 18″ Gas Trimmer
Experienced gardeners share their insights in answering this question :
WHERE DO I BUY BOTTEM CASEING FOR SPOOL
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
Often, you can simply depress two retaining tabs on either side of the housing to release. Lift out the spool and remove any excess line. You can use a small brush to clean away any debris from the spool, eyelets, or the trimmer head housing.
String trimmer line should be replaced at the start of each season as old line can be brittle and lead to easy breaks. Line may wear down faster if you`re cutting thick weeds or against hard surfaces. The traditional bump head has a round, black cutting head with a spring loaded knob in the center.
Disconnect the plug from mains. Press the release latch on the spool head cover and remove cover, pulling it straight off the cutting head assembly. Pull the cutting head cover away from the spool holder. Keep all areas of the cutting head cover and spool holder clean.
String trimmer line should be replaced at the start of each season as old line can be brittle and lead to easy breaks. Line may wear down faster if you`re cutting thick weeds or against hard surfaces. The traditional bump head has a round, black cutting head with a spring loaded knob in the center.
String trimmer line should be replaced at the start of each season as old line can be brittle and lead to easy breaks. Line may wear down faster if you`re cutting thick weeds or against hard surfaces. The traditional bump head has a round, black cutting head with a spring loaded knob in the center.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
My Husqvarna 24C fuel pipe in the fuel tank has perished and broken can I replace it and if so how?
ANSWER : Fuel lines are a push/pull fit, the fuel line has 2 flanges, one should sit either side of the fuel tank. I will send you a link to the parts manual.
Read Full Q/A … : Forest & Garden 125l 18″ Gas Trimmer
What size trimmer string does a husqvarna 223L weed eater use
ANSWER : This string trimmer will use .080 trimmer line
Read Full Q/A … : Forest & Garden 125l 18″ Gas Trimmer
Trimmer head line loading instruction – Husqvarna 28cc Gas Line Trimmer
ANSWER : 1. Remove the cap on the trimmer head, it unscrews.2.
The spool comes off, and on the inside of the spool there is a small
hole, this is where you will start your trimmer line. It it will hold it
in place while you wrap it. There is also arrows on the spool showing
the direction that you need to wrap your spool.3. Insert the
line in the hole and start to wrap the line in the directions of the
arrows, try to keep the line in rows, or else the line may bind and you
will have to do it all over again.4. Feed the line through the
retainer and reinstall the spool by lining up the retainer and the slot
on the outside portion on the trimmer head, the screw back on the
trimmer head and you will be ready to trim.
The spool comes off, and on the inside of the spool there is a small
hole, this is where you will start your trimmer line. It it will hold it
in place while you wrap it. There is also arrows on the spool showing
the direction that you need to wrap your spool.3. Insert the
line in the hole and start to wrap the line in the directions of the
arrows, try to keep the line in rows, or else the line may bind and you
will have to do it all over again.4. Feed the line through the
retainer and reinstall the spool by lining up the retainer and the slot
on the outside portion on the trimmer head, the screw back on the
trimmer head and you will be ready to trim.
Read Full Q/A … : Forest & Garden 125l 18″ Gas Trimmer
What type of oil should be put in the 125L and what is the ratio?
ANSWER : 1:50 two stroke oil1 part oil to 50 parts fuel
Read Full Q/A … : Forest & Garden 125l 18″ Gas Trimmer
In what order does a carburetor gasket kit go on a husqvarna 125L weed trimmer
ANSWER : There is only one gasket, Jenny. To figure ouut which way it goes, first put it onto the carby, then transfer it to the motor. Next put on the carby, and tighten the screws. Then hook up the electrical wiring and the fuel lines, and the job’s done.
Read Full Q/A … : Forest & Garden 125l 18″ Gas Trimmer
How do you replace the line on the spool? – Husqvarna Forest & Garden 125l 18" Gas Trimmer
ANSWER : WHERE DO I BUY BOTTEM CASEING FOR SPOOL
Read Full Q/A … : Forest & Garden 125l 18″ Gas Trimmer
What is the oil/gas ratio for a 2-cycle engine?
ANSWER : The ratio is 40:1 the greater being petrol
Read Full Q/A … : Forest & Garden 125l 18″ Gas Trimmer
My 128LD is just about 1 yr. old. It has sat thru the winter with gas in the tank. This is the first time I’ve had it out this spring. When I push the primer bulb no gas is visible. Could the oil in the gas have separated and blocked the lines to the carb? They look clear. I’m having trouble trying to remove the lines. Can they be cleaned using a pipe cleaner or other small object or am I barking up the wrong tree?
ANSWER : Your right, what happemd when the fuel is left in for a while is, the petrol evaporates off leaving the oil gumming up everything. You can flush through with need fuel, but make sure you remove all the parts first and dont run the engine on the neat fuel.
Read Full Q/A … : Forest & Garden 125l 18″ Gas Trimmer
