Kubota

How do i replacement a deck belt

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

The “Deck Belt” goes around the pulleys right above the blades on the deck and then to a double pulley. The “Drive Belt” on your mower goes from the transmission, around an Idler pulley then over to the double pulley I mentioned before. The Drive belt also plays a role in making the wheels turn.
There is no specific time length that mower belts need to be replaced. Some belts may last longer than others due to different operating conditions. One thing is for certain though, the more the mower is used, the sooner you will need to consider replacing the mower belt.
There is no specific time length that mower belts need to be replaced. Some belts may last longer than others due to different operating conditions. One thing is for certain though, the more the mower is used, the sooner you will need to consider replacing the mower belt.
Part Numbers: K5579-36710 We stock a wide variety of replacement parts for Agricultural Equipment please contact us if you have any questions or if you would like more information.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Drive belt Have replace drive belt but mower still has no forward movement. Mower is only 2 years old but its already had to have another drive belt installed by the dealer last year. wanted to do it myself but when i install belt theres hardly any tension so mower doesnt move. Checked and rechecked the diagram and is installed correctly. Cant find a tensioner adjustment if it has one.
ANSWER : I don’t have an answer for you, but Do you have a diagram of the Drive Belt?

Read Full Q/A … : Kubota

ROUTING OF BELT – Mtd Drive Belt 42"
ANSWER : Diagram is on the mowing deckBest regardsCk

Read Full Q/A … : Kubota

Replaceing mower deck belt on 20 hp 42 mower model no 917275660. Got the belt on. How do I get the cluch spring back on.
ANSWER : Are you refering to the spring attached to the end of the cable that runs up to the lever on the dash to engage the blades? All you needed to disconnect was that cable on top of the idler arm that’s held in place by a ‘hairpin’ and the left pulley cover to put the belt on.

Read Full Q/A … : Kubota

Need diagram of deck belt installation – Craftsman 17.5 hp 42 in. Deck Lawn Tractor – CA Model
ANSWER : May I get the make and model # to get you the right belt diagram

Read Full Q/A … : Kubota

Do I have to remove the mower to replace the secondary drive belt?
ANSWER : Detaching the deck is the best way to do a drive belt, the first time you do the deck can be a mind bender, but you can mark the items place with tape and a pen so it makes it easier to install and or pictures. you can bend the belt guide bars rather than trying to remove them and bend them back into place when the belt is back on

Read Full Q/A … : Kubota

Fitting new drive blet
ANSWER : Just loosen the adjuster and when it loose pull-out the loosen belt and replace with the new one and retight the adjuster at exact belt tension

Read Full Q/A … : Kubota

Mower belt diagram – Craftsman 17.5 hp 42 in. Deck Lawn Tractor – CA Model
ANSWER : You can get a belt diagram from

sears.com

just follow the leads, and have your model number handy, you will need it.

you can also get this from ayp.com

Read Full Q/A … : Kubota

I NEED A DIAGRAM FOR REPLACING THE BELTS ON THE 3 BLADE 46″ DECK. MADE IN 2007
ANSWER : MTD says there are 2 different applications. I hope this one is yours, if not, by using it as a reference; maybe you will be able to do yours. Good luck.

http://support.mtdproducts.com/app/answers/detail/a_id/7/~/how-is-the-46%22-cutting-deck-belt-routed%3F

Read Full Q/A … : Kubota