How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
Description. Traction drive belts provide power to drive the wheels. John Deere belts contain strong material to prevent stretching and roll over which provides smooth engagement and consistent power.
The 170 Riding Lawn Tractor was produced from 1989-1990 as part of the Late 100 Lawn Series. Standard features included a 14 HP Kawasaki engine, 5 speed gear transmission, manual sector and pinion steering, and a 38″ mid mount mower deck.
Belts that are too tight put an excessive load on pulleys, shafts, and bearings. Excessive belt tension will also wear out a belt quickly. Proper belt tension is 1/2 inch of sideplay both ways. Press down on the belt midway between pulleys and observe the travel.
Belt tension is measured by plucking the belt span while holding a sensor close by. Belt tension is adjusted until the belt span frequency, or measured tension level is within manufacturer`s recommendations.
The smooth side of the belt goes on smooth pulleys (as shown on the idler pulley pictured above), while the ribbed side wraps around the grooved pulleys.
The “Deck Belt” goes around the pulleys right above the blades on the deck and then to a double pulley. The “Drive Belt” on your mower goes from the transmission, around an Idler pulley then over to the double pulley I mentioned before. The Drive belt also plays a role in making the wheels turn.
S160 | Lawn Tractor | 24 HP | John Deere US.
With rated engine horsepower up to 350 hp, the 7R Tractors, powered by John Deere PowerTech™ 6.8L and 9.0L engines, offer maximum performance in the field and during transport.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
How do i replace a clutch on a JD 3020 tractor
Break it in half, then get with it.
Looking for information on a John Deere tractor S/N CH0850S017329 and the current estimated value of this tractor with approximately 2,700 hours on it.
Can you please post the model number of the tractor? Thanks
My john deere z425 start fine but does not move
Check drive pulleys and belts.
Weak fire out of coil wire – John Deere Pto Clutch For Stx38 And Stx46 Lawn Mowers
This can be due to a dirty flywheel, an improper gap between the flywheel and coil, or a coil that is failing, first check for rust or dirty build up on the flywheel, then check for proper gap, and if neither of those are the issue, replace the coil
Our john deere 400 is eating the belts for the front pto drive
Flat idler to left of belts is most likely seizing up during use.
I have vibration in the deck and have checked for a warped deck, busted spindles, and bent blades
Depending on the machine?? check or replace the cutter belt and also check the v pulleys for alignment
Which way do i install thermatate in john deere 4020
Looking at stat top part looks like a handle around it
<!– from fixya rte –>How to injstalla48 inch belt – John Deere Riding Lawn Mower. EZtrak Z425 54 in. 22 HP V-Twin Zero-
This link to replacing the drive belt on your mower should help.