WeedEater Hedge Trimmer 25cc Engine

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Weed Eater, a brand of string trimmers, is a power tool designed for a specific purpose in lawn maintenance. Although it may seem more economical to use one tool for multiple purposes, using a Weed Eater to trim hedges is dangerous and often does not produce the desired results.
A string trimmer, also known as a weed whacker, is a tool used for trimming grasses and remove weeds in tough to reach places. Because of their mobile nature, trimmers can easily reach grass around trees, houses, building, and other obstructions.
Line trimmers, also known as weed eaters, are designed for trimming grass and weeds along edges and in hard-to-reach areas. They typically have a bent shaft used for smaller jobs. While the whipper snippers are designed for cutting thicker grass and brush.
What is the difference between a hedge trimmer and a hedge cutter? Usually, hedge trimmers are used for `light work` on branches and bushes. Tidying up and shaping shrubs is another of their functions. However, heavy-duty work is more suited to hedge cutters, for example, breaking down big branches and thicker bushes.
Release the clutch too soon. Ideally, you want your car to ride as smoothly as possible. Releasing the clutch too early will make your vehicle jerk while putting excessive pressure on the engine and transmission. This overheats the clutch, which can do serious damage over time.
For a manual transmission clutch, it`s positioned between the engine`s crankshaft and the transmission housing on an input shaft, inside the bell housing. In an automatic transmission, a series of clutches are located inside the transaxle assembly.
A string trimmer, also known by the portmanteau strimmer and the trademarks Weedwacker, Weed Eater and Whipper Snipper, is a garden tool for cutting grass, small weeds, and groundcover.
Hold the weedwacker close enough to the ground that it will cut grass to about an inch above the soil. If the grass is heat stressed, or a variety that cannot tolerate close cropping, hold it higher up. Swing the head gently from side to side as you cut, moving forward in short steps as you do so.
There are three major types of hedge trimmers: double-sided, single-sided and pole hedge trimmers.
As mentioned above, double-sided hedgetrimmers are by far the most common kind around and typically the best choice for the vast majority of hedge maintenance work, including everything from light trimming in domestic settings to precision shaping and topiary in formal and ornamental gardens.
We recommend avoiding hedge cutting during the main breeding season for nesting birds, which usually runs throughout March to August each year. This can be weather dependent and some birds may nest outside this period, so it is important to always check carefully for active nests prior to cutting.
Hedge trimmers feature a cutting bar, with lengths ranging from about 18 to 26 inches. Those with a longer cutting bar can tackle larger shrubs and clear more with each pass. But they`re also harder to use; a bar that`s too long can feel unwieldy.
If you are sure that your clutch has worn out beyond repair then you can potentially replace the clutch yourself at home. It is possible, but it is a relatively lengthy and complicated procedure. There are several fiddly steps where there is a wide scope for things to go wrong.
Clutch Rebuild, Spline Conversions & Triple Disc Upgrade. Mantic Clutches are fully serviceable and completely rebuildable. This is a popular alternative for worn out clutch discs and flywheels. Also, we can easily convert an existing Twin disc clutch to a Triple or Quad disc clutch kits.
Why Is it Sticking? Your clutch pedal connects to its operating system via a cable. If the cable becomes stretched, then it loses some of the tension it needs to work. And if the cable breaks, then the clutch loses its connection and may stay down and fail to rise at all.
The primary clutch, or “drive clutch,” is the forward mechanism of a CVT attached to your engine`s output shaft. It consists of two tapered plates or “sheaves” on a self contained shaft. One sheave is mobile and one stable, with an end of the drive belt looped between.
The trick is to let the clutch out to the engagement point quickly and then more slowly from there. The only way you can know where this engagement point is, is by getting a feel for the car.
The clutch is designed to engage and disengage the connection between the engine flywheel and the transmission input shaft. The clutch is operated by pushing on the clutch pedal inside the vehicle, which causes the clutch to disengage, and as the pedal is released the clutch will engage.
Hand on the gear lever. Push the clutch pedal right down and at the same time let the accelerator pedalcome right up. Move the gear lever to neutral and hold it there. Let the clutch pedal come up, press the accelerator pedal quickly and release it immediately.
When performing a clutch replacement, it is best practice to replace the clutch disc, pressure plate, pilot bearing and throw out bearing. The flywheel is also resurfaced or replaced if it is beyond the service limit or if it is a dual mass flywheel (this type of flywheel is not machinable).
To start with the basics, the clutch is the left hand pedal in manual cars. This connects to the inner workings of the car, acting as a sort of bridge between the engine and the gearbox (which is itself connected to the wheels). Starting from the engine end, the clutch consists of: A flywheel.
Clutch Pullers are a useful tool used to remove the drive clutch off of the engine`s crankshaft. This clutch puller is for use with P90X, P190X and P90X-HD drive clutches. Found in 2020-2021 RZR Pro XP, 2021 Turbo & Turbo S, & New Body Style 2018+ Ranger`s, 2019+ Ranger Crew Models & Ranger Single Cam Models.
Stanley Black & Decker holds the Weedwacker trademark, which might seem like an asset for the company right now. Weed Wacker, note the space, is owned by Environmental Essentials, LLC. The trademark details on Justia.com says Weed Wacker is to be used for odor neutralizing purposes on various surfaces.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

My weed eater hedge trimmer runs for about 10 minutes and cuts off. It seems as though it is flooded, because it won’t start again until some time later. But it continues with the same pattern. I purchased a can of premixed gas/oil to make sure it was my mixture, to no avail. I have not replaced the spark plug yet, but I don’t think that has anything to do with it. Do you have any suggestions?
ANSWER : The plug can be the problem but also the air mix as well get the best plug you can

How to repair clutch HS45 Stihl – RTO Weed Eater Hedge Trimmer 20cc, Reconditioned
ANSWER : I’m not familiar with your machine, BUT… most of those centrifugal clutches ARE NOT repairable, and must be replaced when failed.

Cant get my Weed Eater 22″ hedge trimmer to feed
ANSWER : Hi,Have a look at these engine starting tips:http://www.fixya.com/support/r9200607-problem_starting_hedgetrimmer

Petrol weed eater will not start. Alomost starts
ANSWER : Hi Mark, I own a shop, we will not work on ryobi, have you gotten 2 seasons out of it? If so thats probably as good as it gets. But you can check carb settings. In the USA they come with limiters on the adjustment screws, not too much you can do(break them off) back your adjustments counter clockwise 1half turn.

How do you put string in – Poulan/Weed Eater No. Te475 952711797 17" Le Gas Trimmer/Edger
ANSWER : Turn trimmer upside down grab the spool head firmly and pull out replace string but wind in the way arrow shows you and replace fishing the loose end back through the hole on the side as you slip back together ,once together grab string and pull to remove any slack and away you go

Where can i find a primer bulb for my weed eater ght-17…it’s split. Do i need another part or can I just get the primer bulb?
ANSWER : You can get a primer bulb at any local lawnmower repair shop. These are less than 5.00 and very easy to install. the bulb primer is sold by it’s self. Best of itGary @ Fix Ya

What size trimmer string does a husqvarna 223L weed eater use
ANSWER : This string trimmer will use .080 trimmer line

Weed eater will start but the head will not rotate. its like some thing is not connected.
ANSWER : Hello snap77b:

From your Description it Sounds like the Shaft May have Slipped Out of the Power Head and the Drive Cable is Not Engaged to the Drive, the Clutch is Worn Out, the Drive Cable is Worn and Requires Replacing, the Trimmer Head has Slipped and is Not Engaged to the Drive Cable or the Trimmer Head Gearbox is Bad and Requires Replacing.
>>Send me the Model Numbers Off the Unit, Please. With these I can Locate the Proper Manual and Better Assist you.
Please, Do Not Hesitate, If I Missed Something or you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Be Happy. Thanks.
Good Luck
Respectfully
jbridger (John)