Karcher

How do i fit a new suction hose to the above unit

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

With the use of a suction hose and filter the pressure washer will be able to draw water from an alternative water source. You will require the suction hose and filter kit (Part number 44402380). The suction hose and filter it is not compatible with the K2 series of machine.
Whether they`re made of black rubber or stainless steel, washer hoses need to be replaced about every three to five years. If it`s been that long, or if the hoses are showing signs of wear, it can be easy to replace them if you follow these simple steps: Turn off the water supply.
High pressure hose couplings from Kärcher are universal and connect all standard hose pipe series, helping you achieve the best results for your garden.
Pressure Washer`s are commonly connected to a running tap via a hose; however they can also draw water from sources such as a rain water tanks & garden bucket with the same performance. So this means you don`t have to miss out on using your Kärcher summer!
In order to cover the various interfaces, from the highpressure cleaner to the nozzle, as well as forward and backward compatibility, a total of 8 different adaptors are available. This ensures that all existing machines and accessories can continue to be used together with the new machines and accessories with EASY!
A suction hose is where the water flows into the suction end of the trash pump. Likewise, the discharge hose connects to the discharge end of the pump. Together, they ensure a successful water movement from one place to another.
You will need to purchase a pressure washer gun that has the proper fittings to connect to your garden hose. Make sure that the pressure washer gun is rated for the PSI of your garden hose. Most pressure washer guns have a maximum PSI rating of 400.
Pressure Washer`s are commonly connected to a running tap via a hose; however they can also draw water from sources such as a rain water tanks & garden bucket with the same performance. So this means you don`t have to miss out on using your Kärcher summer!

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Soap feed The soap feed hose on my Karcher 2650 does not suck up the soap into the washer. I pulled off the connector piece that the hose is connected to. I can blow through the hose. There is a little metal finger thing that you can tell pushes up into place when the water pressure is high. It seems like it is supposed to drop down and allow some soap through when the water is running. I found a loose(attached to nothing) gasket, looks like a little donut. It was just free floating in there. I’m thinking it may go over the finger mechanism. I just put it back on top of the finger, like a halo and put the screw in piece back in. Anyway, if you know, let me know how all that goes together.
ANSWER : I fixed mine works good too, watch my video step by step i put it on youtubehttp://www.youtube.com/watch?v=UFXSLOBL0Mg

Read Full Q/A … : Karcher

In the base of a karcher k2,27
ANSWER : Hi,

Diagram attached hope this helps:)

Brad

Read Full Q/A … : Karcher

Unit pressurizes then unloads over and over again with green tip, with red works perectly
ANSWER : Bad green tip

Read Full Q/A … : Karcher

Karcher K2.91M nlets water in and out but won’t
ANSWER : Wot like a buzzing noise if so try and turn the fan at the rear of the motor if you can do this it is more than likley the capacitor

Read Full Q/A … : Karcher

1750 psi Electric Pressure Washer: My pressure washer is losing pressure and is pulsa…
ANSWER : If the pressure washer is pulsating then that is a sign of check valve failure. You may be able to clean of replace the check valves. Replacing the head is the wrong way to go. This is completely unnecessary. If you can tell me the model number of your pressure washer then I can assist you better in pointing you in the right direction.

Read Full Q/A … : Karcher

Why dose my Karcher K2.35 keep blowing the gun hose off?
ANSWER : There is a good chance you are missing the black plastic clip that holds the hose into the trigger gun. If you look at where the hose goes into the gun there should be a flat slot where a black plastic clip would slide in and keep the hose into the trigger gun.

Read Full Q/A … : Karcher

High pressure hose. How do you get if off the karcher k 3.99
ANSWER : Hi, you have a little black clip in the gun hand where the hose pushes in, just pull it out and the the hose will pullout.

Read Full Q/A … : Karcher

Karcher K2.19 Pressure Washer – Hose Coming Off
ANSWER : Yeh this is what happen if you remove the yellow cover and you will see the metle u clip that is all that part holds on. you will needa new one from your local pressure washer supllier

Read Full Q/A … : Karcher