How do I find the part number for the starter gear

A starter ring gear is a part attached to an internal combustion engine that is part of the assembly which transfers the torque from the starter motor to the engine`s crankshaft, in order to start the engine. The starter ring gear is usually made from medium carbon steel.

Your starter can usually be found on the passenger`s side (if RWD) of the engine, just below the exhaust manifold. Or if it is FWD, check on the drivers side above the transmission or under the exhaust manifold. They can also be located just under the intake manifold on some vehicles.

The starter motor is mounted on the engine casing and a pinion on the end of the starter motor shaft engages with the flywheel teeth.

How Much a Starter Replacement Costs. The cost of rebuild parts for a starter can range from as little as $50 to as much as $350. A brand-new starter can range from $80 to over $350. For a qualified mechanic to replace or rebuild your starter, you can expect to pay between $150 and over $1,100.

Starting relay position

The fuse box (also called the power box), the instrument panel under the fuse panel, or the right fender are all possible locations. In most cars, it will be under the hood, in a large box with a black lid. This is where car fuses and relays are installed. It is also called a fuse box.

Average car starter lifespan

A car starter can give you around 80,000 starts before you should expect it to struggle, regardless of the mileage you drive. This is around 150,000 miles for some cars, while some starters can last the vehicle`s life.

Pinion Gear – A pinion is the smaller of two meshed gears in an assembly. Pinions can be either spur or helical type gears, and be either the driving or driven gear, depending on the application. Pinion gears are used in many different types of gearing systems such as ring and pinion or rack and pinion systems.

Gears are toothed wheels which are used to transmit force to other gears or toothed parts by meshing with minimal slip. When two gears are meshed together, the smaller gear is called a pinion.

The Plunger – A mechanism that gets pulled into the solenoid`s electromagnet, moving the contact disc and creating a circuit to spin the motor. It also pushes the drive pinion into the flywheel.

The Starter Meshes With The Engine`s Flywheel

The starter has a small starting gear that, when you turn the key or press the engine start button, engages the engine`s flywheel. Then it delivers power, getting the engine rotating.

The starter clutch / bendix gear connects the starter motor and the crankshaft.

A ring gear is a removable item that is installed on the flywheel and engages with the starter drive.

A ring gear is a removable item that is installed on the flywheel and engages with the starter drive.

The starter drive clutch is a one way roller clutch and a key component in a starter motor that is used to crank internal combustion engines. The starter drive clutch transmits torque from an electrical motor to a ring gear mounted on a cranking shaft in an engine thus cranks the engine.