Bilt Pony 6.5 Hp Rear Tine Tiller

How do i get old ball bearing off shaft
Experienced gardeners share their insights in answering this question :
Hello mikeant2:

Usually Heat and a Press/Puller are Required to Remove the Bearing from the Shaft. Sometimes I have even had to Cut the Bearings Off with a Die Grinder.
Please, Do Not Hesitate, If I Missed Something or you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Be Happy. Thanks.
Good Luck
Respectfully
jbridger (John)

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Powered by a 250cc, 11.5 OHV Briggs & Stratton PowerBuilt™ engine, the Pony has the strength to break up hard-packed soil quickly and easily.
The product`s model number is essential to finding correct genuine factory replacement part numbers for your Troy-Bilt® outdoor power equipment. The Model number is eleven characters long and is printed on the left side of the Product Identification Label. Characters can include numbers, letters or hyphens.
What year was my equipment built? The 5th character of our 11 character product serial numbers will indicate the last number of the year that it was manufactured. Since 5th character in the example is a 4, the year of manufacture would be a year ending in 4.
Pony 42 Troy-Bilt Riding Lawn Mower – 13AN77BS023 | Troy-Bilt US.
The Troy-Bilt Pony™ rear-tine tiller is engineered to power through soil preparation, year after year, with a limited lifetime warranty on the transmission.
Troy-Bilt® is headquartered in Valley City, Ohio, and our reliable equipment includes select products that are designed, built and tested right here in the U.S. – from Ohio and Mississippi to Tennessee and Arizona.
Troy-Bilt 13WX79BT011 46 in. Horse Riding Mower with 20.0 HP Kohler Courage Engine and Hydrostatic Transmission | CPO Outlets.
Our current factory model and serial numbers are each 11 characters in length. A character could be a number, dash, or a letter. Note: The first 2 characters of the Model Number identify the product category (see table below). * Attachments may also begin with the letters OEM (Original Equipment Manufacture).
MTD`s regional brands include Troy-Bilt® in the Americas, Rover® in the Pacific, and WOLF-Garten® in Europe. The portfolio also includes Remington®, Yard Machines®, Columbia®, and MTD Genuine Parts® brands, all primarily sold in the Americas; and Robomow® which is sold in the Americas, Europe and the Middle East.
Troy-Bilt TB130 160-cc 21-in Push Gas Lawn Mower with Honda Engine in the Gas Push Lawn Mowers department at Lowes.com.
Powered by a Briggs & Stratton 140cc EX 550 Series™ Engine.
Product Details. The Troy-Bilt TB200 self-propelled mower reduces mowing effort and features a dependable Prime `N Pull Briggs and Stratton engine for easy starting.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

How do i change ball bearings on tiller shaft
ANSWER : Hello mikeant2:

Usually Heat and a Press/Puller are Required to Remove the Bearing from the Shaft. Sometimes I have even had to Cut the Bearings Off with a Die Grinder.
Please, Do Not Hesitate, If I Missed Something or you Hit a Snag or this Does Not Correct the Problem, I am Here if You Require More Assistance. Hope this Helps. Let me Know What Happens, Please. May the All Mighty Bless You and Yours. Be Safe and Be Happy. Thanks.
Good Luck
Respectfully
jbridger (John)

After a few weeks of no use, my tiller started on the first or second pull but even after long warm up, it stalled as soon as I trottled up. This happens even on the stand with no resistance/load. The machine is not jammed–the tiller blades turn while the machine is idling. It just dies as soon as I try to work.
ANSWER : Hi there,Sometimes the gas filter in the gas tank gets plugged. Here are some instructions that will help.http://mantis.com/mantis-owners-manuals.asp Thank You for choosing FixYa.com and good luck.

My Mantis Tiller won’t start and there is grinding type noise when I try and start it. I recently did some very lengthy trench digging over a period of about 2 months.
ANSWER : It sounds like the clutch springs may be overheated and the clutch shoes rub while you try to start it.If you loosten the screw that holds the engine to the gear box you can try to start it without the clutch and see if that is it.Good luck

I have a two cylinder Mantis tiller. It has locked up and the cord is locked. I am unable to pull the cord. Any suggestions? I was in the process of using the tiller when it felt as if it were running out of gas. It stopped on its own, and then it was locked up and I was unable to pull the cord.
ANSWER : Check the oil, if not full fill it, take the shroud off, should be for bolts, fit a socket on it with a breaker bar or ratchet and turn it a few times, then reassemble and start. Hope this helped Tim

Mantis tiller idle screw adjustment – Mantis 2-Cycle Tiller
ANSWER : Start out with 1.5 turns on High speed jdet and 1/2 turn on the low speed. Make sure plug is not wet, better yet install a new one. Clean, fresh fuel and give it a pull.

My mantis tiller starts but there is no input to the tines, what could be the problem?
ANSWER : Here is the parts breakdown. You should be able to fix it yourself.

http://www.alamia.us/Mantis_Tiller_Parts_s/149.htm

My tiller stopped moving during use, after enitting a puff of smoke. The motor still works well; it does not move, however. Is there a belt that could be burned out? Is this something that can be attempted by an amateur or should best be left to the experts?
ANSWER : You don’t say where the smoke came from but check out the worm gear box and see if gear is eaten up. Supposed to be greased regularly but gear can wear out over time or overloaded digging. . Don’t know your model but here is manual on one of them. See if it helps. Look fer it!http://mantis.com/global/assets/owners_manuals/08_tillers/401702.pdf

MDT Tiller starts and runs but tines won’t turn
ANSWER : -Won out drive or driven gears.

Good luck

Mai