350 18 Inch Gas Chainsaw 52CC Fully Assembled Brand New 18″

Experienced gardeners share their insights in answering this question :
The gap setting is .010 or if you don’t have a feeler gauge you can use a business card. GOO LUCK FRIEND.

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Check the air filter and spark plug on the Husqvarna 350. If the air filter is clogged or dirty, clean it or replace it with a new one from Husqvarna or an online parts house. You can test this by trying to start the saw without the air filter. Some parts houses offer maintenance kits that include the filter.
In 2013, KTM AG (Husaberg`s owner) bought Husqvarna Motorcycles, marking the reunion of two halves of the original Husqvarna brand of the 60s and 70s! The Husqvarna Motorcycles brand returned to its glorious origins with state-of-the-art technology and the iconic Swedish blue, yellow and white colour scheme.
Product Summary. The Husqvarna 350 is an extremely lightweight, professional saw with plenty of power and versatility. The wide-set handles create unsurpassed balance and maneuverability.
Engine. The FC 350 engine is designed to deliver maximum performance with all major engine components and shaft arrangements positioned to enhance overall handling. Weighing just 59.9 lbs (27.2 kg), the 350 cc 4-stroke engine centralises mass and aids the anti-squat behaviour of the whole chassis.
Engine. Weighing in at only 27.2 kg and churning out a maximum power output of 58 hp, the motor in the FC 350 is designed with performance as a priority.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

<!– from fixya rte –>What is the gap setting on the coil – Husqvarna 350 18 Inch Gas Chainsaw 52CC Fully Assembled Brand New 18"
ANSWER : The gap setting is .010 or if you don’t have a feeler gauge you can use a business card. GOO LUCK FRIEND.

Kill switch doesn't work, how do i fix it? – Husqvarna 350 18 Inch Gas Chainsaw 52CC Fully Assembled Brand New 18"
ANSWER : The switch connects directly to the coil body of the ignition module. You may have to remove the left side cover to expose the ignition module. The switch, when off, connects this wire to engine ground. There may be debris in the contacts of the switch that prevent contact. You will have to remove the air cleaner assembly and maybe the carburetor itself to access the switch. Good luck!

Automati oiler not working – Husqvarna 350 18 Inch Gas Chainsaw 52CC Fully Assembled Brand New 18"
ANSWER : Check the tube is that clean and if its ok check the cap air vent of oil tank if its works then oil pump is faulty.

Oil leaks out of chainsaw when stored – Husqvarna 350 18 Inch Gas Chainsaw 52CC Fully Assembled Brand New 18"
ANSWER : Thats not uncomon mine leaks as well,,if your going to store it away drain the oil tank dry first

Stalls at full power. – Husqvarna 350 18 Inch Gas Chainsaw 52CC Fully Assembled Brand New 18"
ANSWER : I am not familiar with where the adjustment screws are for this but is sounds like you need to adjust the high end of the carb. There are two small screws and you can adjust these while the machine is running. Dont over turn these, it only takes a very small adjustment and always make a mental note of where you were originally.

Hi

I have a Husky 350. It starts and runs until I give it gas, then it bogs down and quits. If I start it and just let it idle, it quits after 10 seconds or so. New plug, clean air filter, fresh gas.

Thanks for your help,
Dan

ANSWER : Take the carb off and clean it out real good.if that doe.s not work you will have to rebuild or replace carb.

Saw runs fine for about 15 minutes,then the idle speeds up,then it dies,almost like it is flooding
ANSWER : Do aclean or overhaul of all fuel components.Change the spark plug or the coil aka=spark plug cable.But if your saw in lees the 2 yrs you need to follow the starting guide in order to avoid flooding.If you need more help come back.Post / thumbs / testimonial are welcome!

Oiler not working – Husqvarna 350 18 Inch Gas Chainsaw 52CC Fully Assembled Brand New 18"
ANSWER : Remove side panel and barand chain clean saw dust out of oil port in saw and the bar as well