Husqvarna
Experienced gardeners share their insights in answering this question :
With the trimmer placed on a level piece of ground press the primer bulb about 10 times.
Open the choke.
Press the throttle and lock it in place with the lock button
Pull the start cord until the engine catches. It doesn’t matter if it cuts out again.
Close the choke, and if the engine did cut out the first time, pull the start cord again. This time it should start and you can start trimming the grass. If it didn’t cut out just close the choke and you’re ready for trimming.
Open the choke.
Press the throttle and lock it in place with the lock button
Pull the start cord until the engine catches. It doesn’t matter if it cuts out again.
Close the choke, and if the engine did cut out the first time, pull the start cord again. This time it should start and you can start trimming the grass. If it didn’t cut out just close the choke and you’re ready for trimming.
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
First prime the carburetor by pressing the bulb five times, activate the choke and pull the starter cord until the engine ignites. Deactivate the choke when the engine stops and pull the starter cord again until the engine starts.
First prime the carburetor, by pressing the priming bulb five time. This ensures there is enough fuel into the engine to start the engine. Activate the choke and pull the starter cord until the engine ignites. Once the engine has stopped deactivate the choke and pull the starter cord again until the engine starts.
The most common problem with a strimmer not starting is that there`s a problem with the fuel mix. Double check that you`ve used 40 parts fresh unleaded petrol to 1 part 2-stroke oil (40:1). Check the petrol you`ve used isn`t stale.
If it is difficult to start the ride-on mower, the most common reasons include: Old fuel; make sure to use fresh fuel, especially after winter storage. Spark plugs might be dirty or damaged. How to examine and replace a spark plug on your ride-on mower.
If it is difficult to start the ride-on mower, the most common reasons include: Old fuel; make sure to use fresh fuel, especially after winter storage. Spark plugs might be dirty or damaged. How to examine and replace a spark plug on your ride-on mower.
If the spark plug produces a spark and you are still having difficulties starting your chainsaw, it`s time to check the gap. The spark plug gap is an air gap between the ground electrode and the center electrode. If the gap is too small, the spark struggles to ignite the fuel and air mixture.
Hold the front handle firmly with your left hand. Pull the starter handle with your right hand. Repeat until the engine fires. Push the choke (half-throttle) and pull until the saw starts.
Get to work faster. Smart Start is Husqvarna`s name for the technology that evens out the increase of momentum that develops when the piston reaches its highest level. This makes it easier to pull the starter rope, which – in the long run – saves both time and money for you and your business.
If it is difficult to start the ride-on mower, the most common reasons include: Old fuel; make sure to use fresh fuel, especially after winter storage. Spark plugs might be dirty or damaged. How to examine and replace a spark plug on your ride-on mower.
Turn on the ignition switch and pull the starting cord quickly. You should see a spark in the plug gap. Since the spark may be faint, it may help to do the test in a dark area. If there is no spark, check for a broken or shorted (bare) lead wire or bad switch.
If it is difficult to start the ride-on mower, the most common reasons include: Old fuel; make sure to use fresh fuel, especially after winter storage. Spark plugs might be dirty or damaged. How to examine and replace a spark plug on your ride-on mower.
A 4-stroke engine needs four strokes of its piston to burn fuel and generate power: Intake: a downward stroke draws in fuel. Compression: an upward stroke expels exhaust. Combustion (Power): another downward stroke brings in more fuel and ignites it. Exhaust: another upward stroke compresses and expels fuel.
Whilst it is ticking, set the choke lever to the half choke position (indicator: diagonal line) – this allows some air to enter the carburettor. Pull the starter grip again quickly and strongly until the motor runs fully. Please wait 30 seconds to warm up the machine before operating the product (ie.
If it is difficult to start the ride-on mower, the most common reasons include: Old fuel; make sure to use fresh fuel, especially after winter storage. Spark plugs might be dirty or damaged. How to examine and replace a spark plug on your ride-on mower.
While a 2-stroke will never offer the torque of a 4-stroke, they come close enough for most weekend riders. Not only that, but they`re lighter and tend to be easier to handle, which makes them great for beginners. In addition, 2-stroke bikes require less maintenance than most 4-strokes, saving you time and money.
If the spark plug produces a spark and you are still having difficulties starting your chainsaw, it`s time to check the gap. The spark plug gap is an air gap between the ground electrode and the center electrode. If the gap is too small, the spark struggles to ignite the fuel and air mixture.
If it is difficult to start the ride-on mower, the most common reasons include: Old fuel; make sure to use fresh fuel, especially after winter storage. Spark plugs might be dirty or damaged. How to examine and replace a spark plug on your ride-on mower.
If the spark plug produces a spark and you are still having difficulties starting your chainsaw, it`s time to check the gap. The spark plug gap is an air gap between the ground electrode and the center electrode. If the gap is too small, the spark struggles to ignite the fuel and air mixture.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
It starts and runs for a bit but as soon as it hits thicker grass it dies
ANSWER : Joe Hi there. Sadly your trimmer will struggle on thick grass as it’s not made for it. You could try moving the trimmer like a scythe. This will aid it as your cutting bit by bit.
Read Full Q/A … : Husqvarna
I have an Electric grass hog dual string trimmer. One side uses the string in a couple of seconds the other side does fine. i do not have an instruction manual.
ANSWER : Wind the strings in the direction of the arrow on the spool.
Read Full Q/A … : Husqvarna
Why does the echo start but die when i move from cold start to run?
ANSWER : Fuel issue, carb adjustment, fuel lines, carb rebuild.
Read Full Q/A … : Husqvarna
Craftsman grass trimmer stalls when warm
ANSWER : The carburetor needs cleaned. Disassemble the carb. and spray with carb. cleaner. Use a Den Tek brush, (used for cleaning between teeth), to clean the small portals. This works great for this job. Make sure the small screen in carb. is free of debris. Reassemble carb. and try starting.If this still doesn’t solve your problem, you will need to buy a carb. kit and replace the appropriate parts.Jim
Read Full Q/A … : Husqvarna
Do you know what the proper Champion part number is for a Toro 51972 weed trimmer is? This was purchased used and it had a RCJ4 Champion plug in it and I just need to verify that this is the correct plug. The trimmer won’t start and I want to start there with trying to solve the problem.
ANSWER : That is the correct spark plug for the unit. i work at a power equipment store where we work on homelites. 90% of the time it wont start or run right is usually carb issues . need to get it rebuild or replaced
Read Full Q/A … : Husqvarna
I have a Ryobi 137 trimmer and the whipper head has lost its spinning speed therefore it won’t cut the grass. Any ideas where the problem lies?
ANSWER : You may have too much string out. Try cutting off some if your machine auto cutting blade is gone or really dull
Read Full Q/A … : Husqvarna
How to respool the line on grasshog electric grass trimmer
ANSWER : The empty spool can be refilled with 30′ of size .065″ nylon line. Make sure you run the line in the direction of the arrow embossed on the spool.
Read Full Q/A … : Husqvarna
I just got a grass hog trimmer that used to belong to my sister. The line is not feeding and I don’t know how to restring.
ANSWER : The cap on the bottom pops off, and there is a spool in there. Sometimes the line melts to itself in spots and you just have to free it and if you feel you need to then you can cut some off.I hope this helps you out.
Read Full Q/A … : Husqvarna
