Garden

Experienced gardeners share their insights in answering this question :
With the eaw unplugged, try pulling the chain by hand to turn the motor to a different spot on the armature.

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

If your electric chainsaw won`t start, try examining it for these issues: Not pressing the safety button at the same time as the trigger. Tripped electrical breaker (for corded chainsaws) Frayed or damaged electrical cord (for corded chainsaws)
There are three main reasons for a chain to come off: Incorrect bar and/or chain for the saw; check to be sure that you are using the proper chain pitch, gauge and number of drive links to match the guide bar. Chain not properly tensioned; It is normal for a new chain to stretch and require frequent adjustment.
The fuel line may be clogged from stale fuel deposits, more reasons to cause your chainsaw to cut out when applying throttle. If a fuel line is cracked, it will leak gasoline and draw air from outside into the fuel line. If the line is leaking fuel, it needs to be replaced.
It ultimately comes down to the factors listed above (especially maintenance). That being said, you can expect a quality chainsaw to last you at least 10 years or more. But if you take care of it, I know people who have saws that have lasted 20-30 years and even longer.
A clogged filter prevents the Stihl chainsaw from starting up. Clean the air filter according to to use and replace the air filter at least once a year to ensure maximum efficiency. Engine overheating is another adverse effect due to a clogged air filter.
Over time, the spark arrestor can become clogged with soot. If the spark arrestor is clogged, the chainsaw may run stall or run rough. To unclog the spark arrestor, remove it and clean it with a wire brush. You can also replace the spark arrestor.
Disadvantages of Electric Chainsaws

Because of its smaller structure and limited power, an electric chainsaw is not up to every job it may encounter. An electric chainsaw is a viable option for trimming branches and bushes, but it might be hard pressed to take on anything greater than a small tree or sapling.

Generally, two-stroke chainsaw engines are built to conveniently run at full throttle without an engine breakdown. Therefore, running at any throttle speed below the full throttle is not advised. Cutting a thick wood or timber while running at a low speed or throttle can cause the blades of the chainsaw to become dull.
The chain saw should be oiled before each cut. Manual Oiling System: Lubricate the saw chain by pressing the bulb on the oil reservoir cap twice before making each cut. Hold the bulb down for 3-4 seconds on each press.
The carburetor might be clogged. A clogged carburetor is often caused by leaving fuel in the chainsaw for a long period of time. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and cause the chainsaw engine to stall.
This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.
Over time, the spark arrestor can become clogged with soot. If the spark arrestor is clogged, the chainsaw may run stall or run rough. To unclog the spark arrestor, remove it and clean it with a wire brush. You can also replace the spark arrestor.
The chain may not have the proper amount of tension. If the adjustment screw is too loose, the chain may not make good contact with the wood. If the chain is too tight, the chain may not rotate at the proper speed, causing the chain not to cut properly. To adjust the chain, tighten or loosen the adjustment screw.
Sharpen before replacing

If your chainsaw chain becomes dull after a long lifespan, it will struggle to cut through the wood at the efficiency it once had. This is why, where possible, you should be looking to keep the will be chain sharp, as sharpening a better course of action than sourcing a replacement.

Even more durable than standard chain is carbide-tip chainsaw chain. Carbide tips last longer than chrome and are not affected by heat. Because of these qualities, carbide chain is excellent for cutting objects that would dull standard chain quickly, such as railroad ties.
Chainsaw feels unbalanced, cuts unevenly, or rattles when in use. In short, if you have attempted to balance your cutting teeth, are certain of your depth gauge, and the tension is properly adjusted, but the saw still doesn`t cut correctly- then you need to replace the chain.
Overview of Electric Chainsaws

Electric chainsaws produce significantly less power than their gas counterparts, which often makes them easier to handle and causes less strain on the user. Additionally, electric chainsaws are relatively low maintenance because they don`t require oil changes or spark plug adjustments.

Even if your saw is in ideal working order, it will overheat if you overwork it. Two ways to do that are to operate it with a dull chain and try to make it do something for which it isn`t designed, such as cut a curve.
Storing regular petrol inside a machine can cause blockages and gumming to the intricate fuel delivery parts, so the most important thing to remember is that whether you`re storing a chainsaw or garden power tool such as a petrol lawn mower you should store your tool without any fuel in it.
If you are using an electric chainsaw with power provided via a cable, you will want to avoid any standing water or excessive moisture. Water and electricity are not a good mix.
This means that the viscosity of this oil ranges (5w30) from 5 when it`s cold to 30 when it is hot. This oil is good lubricating for light-duty diesel and petrol engines. So, you can use it as a Chainsaw Bar Oil.
If you run a chainsaw without bar oil, it`s likely that the chain will heat up and eventually break. This can cause extensive damage to the chainsaw and may even require a new chain and bar. It`s imperative that you use the correct amount of bar oil.
【PROFESSIONAL BATTERY PACK】: DREAMVAN battery chainsaw equips with a 20 V 4.0 Ah lithium-ion battery and a fast charger. The LED indicator shows the remaining power. It takes only 2 hours to fully charge with our fast charger.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

16″ Electric Chain Saw: what kind of oil is used for electric chain saw…
ANSWER : I assume you are asking about the oil for the chain. Any good quality “Bar and Chain Oil” will do fine. Do not use motor oil you use in your car engine as it will not properly lube the chain and will result in quicker dulling and early demise of the chain.

You can get the “Bar and Chain Oil” at most hardware stores or Farm Supply stores.

Read Full Q/A … : Garden

Saw will not run – Remington Electric Chain Saw
ANSWER : Could be a bad power cord, bad switch or bad brushes/springs in the motor. An AC voltmeter is helpful for tracking down these types of problems. Good luck!

Read Full Q/A … : Garden

Need a chain – Ryobi 18-inch Electric Chainsaw Chain Saws
ANSWER : Http://www.ereplacementparts.com/search_result.php?type=search-model&q=yobi+18-inch+Electric+Chainsaw&manufacturer=Ryobi

Read Full Q/A … : Garden

Pull cord is difficult to pull after third pull becomes stuck but will turn if pull hard repeats every three to four pulls.
ANSWER : No response to clarification request.

Read Full Q/A … : Garden

I was using the saw as a chain saw last weekend to cut up an old tree stump when the chain came off. I don’t know how to access it to put it back on and don’t have a user manual. The saw belonged to my late father and I don’t know if he even kept the manual.
ANSWER : You will have to remove the cover on the side the chain bar goes into. There should be one or two nuts holding the cover on the side. The is also a chain tension adjuster you may have to loosen to put it back on. Make note of the direction of the teeth on the chain. It is an directional chain. The tension adjuster is usually a flat head screw on the front side right beside the chain bar.Unless it is a really old saw, manuals are available from most manufacturers for free download. See if you can locate a brand name and model number.

Read Full Q/A … : Garden

Need a chain for 14in electric poulan chain saw the normal 14 in chain does not list the electric saw as one it will fit
ANSWER : Hello Jennifer;
The number of drive links, pitch and gauge of the chain need to be determined to answer your question. If you take your saw or just the chain to a local chain saw outlet a new chain can be fabricated in a very few minutes. This will save shipping and handling fees as well. While there get the numbers mentioned above. Once you have these you can likely find a low kickback chain in a local home center the next time the chain needs replacement.
The FAQs here can likely answer all your questions.
http://www.oregonchain.com/pro/service/faq.htm

If you have more questions or need additional help please reply below and I will get back to you. HTH & Good Luck.
Lou
Thank You for using FixYa.

Read Full Q/A … : Garden

My chainsaw starts when there is no bar and chain on it but when I put the bar chain and side casing back on tighten the chain and pull the starter cord it is hard to pull and then the chain goes loose again
ANSWER : Have you just replaced the chain?If so there is a possibility the chain and drive sprocket don’t match causing the engaging spurs to ride on the sprocket teeth

Read Full Q/A … : Garden

Chain keeps falling off – Poulan 18" Chain Saw Replbar (small Saws)
ANSWER : Your chain is too loose. If you’re using an old chain, you might need to have a link taken out of it. You can find replacement chains for your saw at Hyperparts.com. Use the application lookup link at the top of the page with your model # to make sure you order the right chain.

Read Full Q/A … : Garden