Briggs & Stratton
Parents gave us their old riding lawn mower. It has the book for the engine but not the blades. The model number under the seat is worn but it looks like 501/1205/K or R 018L4. Mom wrote on the front of this that it is a Briggs and Stratton synchro- balanced 12 Horse power. It says on the mower 38″ cut. Please help! Thank you so much! Susan
Experienced gardeners share their insights in answering this question :
The best thing to do is take the blades off and get the # off them and let me know. They may be aftermarket #’s that I could look up and tell you what blades you need. You may have to wire brush them to find the #. Dwain
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
The easiest way to find replacement lawn mower blades is with the OEM number. The OEM number is the numerical part number of the blade assigned by the manufacturer. In most cases, just typing this number with the manufacturer name into a search engine or online store will be enough to bring up some promising results.
Unfortunately, it is possible to put a lawn mower blade on wrong, resulting in damaging the mower, poor grass cutting performance, and even safety risks. To avoid such problems, it is important to understand how to properly install a lawn mower blade, and to make sure that it is securely attached to the mower.
No, not all lawn mower blades are the same. Each type of lawn mower has its own specific blade type that is designed to work best with that particular mower. For example, a riding lawn mower will have a different blade than a push lawn mower.
While most lawn mowers come with a standard blade, you may be wondering if it`s possible to put a smaller blade on a lawn mower. The answer is yes, but it`s important to understand the reasons why you might want to do this and the potential benefits it could bring.
The best way to find a replacement blade is by referencing the part number stamped on the blade, usually somewhere between the center holes. This number can be used to find an OEM replacement blade or cross reference high-quality aftermarket blades at a reduced cost.
Right-hand cut vs left-hand cut blades
Believe it or not, the cutting edge is not on the same side for all lawn mower blades. Right-hand cut lawn mower blades are overwhelmingly the most common type. Left-hand cut blades can be found on some mower`s manufactured by Kubota, Woods, Walker, and others.
It`s important that the blade`s cutting edge follows the direction of rotation. The wings of the lawn mower blade will be oriented up toward the mower deck, and any writing on the blade will likely be facing away from the deck. If the blade bolt comes with a washer, its concave side will be facing the blade.
So, are lawn mower blades universal? Lawnmower blades are not universal, they are mower specific. A mower blade must be an exact fit and torqued to the manufacturer`s specification.
Sharp blades actually improve the overall health of your lawn. For example, clean-cut grass from a sharp mower recovers from a cut quicker. This allows the grass to fight off any chance of disease.
It`s important that the blade`s cutting edge follows the direction of rotation. The wings of the lawn mower blade will be oriented up toward the mower deck, and any writing on the blade will likely be facing away from the deck. If the blade bolt comes with a washer, its concave side will be facing the blade.
Unless your blade is really old, the side with the cutting edge will be visibly sharper and shinier than the other side, which will have a dull and blunt edge. The side of the blade with the blunt edge should always face upwards towards the lawn mower`s deck.
So, are lawn mower blades universal? Lawnmower blades are not universal, they are mower specific. A mower blade must be an exact fit and torqued to the manufacturer`s specification.
Twin blades produce a superior cut, giving your lawn a smooth, even surface. Our blades are designed specifically for our mowers, using advanced engineering to lift each blade of grass and achieve a perfect cut. Twin blades produce finer clippings. That means less clumping and a better look for your lawn.
Standard blades, sometimes referred to as 2-in-1 blades, are designed to cut grass and then either discharge or bag the clippings. Standard and high-lift blades are straight and aerodynamic as possible to create a powerful lift that will expel the grass clippings from under the deck.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
The edger is not cutting very well. Any tips to make it work better?
ANSWER : You said cutting, not running, so I suggest removing the blade and sharpening on a grinder or buying a replacement blade.I hope you find this very helpful.
Read Full Q/A … : Briggs & Stratton
I need to get the blade of the lawn mower sharpened.Any tips on how to disconnect the blade fropm the lawn mower?
ANSWER : There is a jig that you can buy that makes this job SO much eaiser. It is a universal jig that clamps onto the deck and keeps the blade from spinning so you can use a ratchet to remove the nut holding the blade on. One name brand is called a “Blade Hog”. You should be able to find one of these at one of the bog box hardware stores.
Hope this helps,
Chad
Read Full Q/A … : Briggs & Stratton
I would like to replace the mulching blades on my Sears Craftsman riding mower with regular cutting blades. I can find plenty of sources for new mulching blades, but not cutting blades. My mower is a model 917.259541 tractor and the blades currently on it are part #134149. I want to make sure I get the right size to replace them. Also, is there a source for a bagging system for this mower, that won’t cost as much as one from Sears?
ANSWER : The straight blade for the 42 inch mower is 138971.They cut better and are easier to sharpen and you will need them if you use a gass catcher. If you do not want to use sears for parts you may be able to find good deals on ebay.
Read Full Q/A … : Briggs & Stratton
Weedeater Excaliber Gas Hedge Trimmer. Is it possible to sharpen these blades? If yes, do you know the procedure?
ANSWER : You should be able to sharpen your hedge trimmer blades. There is a good video on how to sharpen hedge trimmer blades on youtube by ereplacementparts. He explains how to do it with a file or a grinder.
Read Full Q/A … : Briggs & Stratton
How to change blade assembly on hedge hog 22 – Black & Decker 22 In Dual Action Hedge Trimmer
ANSWER : Are your blades dull, they can be sharpened. There is a good video on youtube by ereplacementparts where he shows you how to do it with a file and with a grinder.
Read Full Q/A … : Briggs & Stratton
How to change mower blades – Cub Cadet Riding Lawn Garden Tractor 25hp Kohler 50"
ANSWER : Fine a way to stop blade from turning, put a socket with long handle and turn countercock wise, some will need a wench on nut at top of shaft to stop blade from turning, torque to 60 # on most 50″ or lower width mowers
Read Full Q/A … : Briggs & Stratton
Husqvana LTH 2038 model, blade is bent so bought new ones, when i tried to put on the new ones the right hand side one hits the deck. What could it be (checked the blades they are the right ones)
ANSWER : It sounds like whatever bent the blade may have also bent the rotator shaft,, if this is the case – replace the right hand rotator shaft,, then re-install the new blades and all should be good to go.
(( if the shaft looks ok on a roll test,, it could be the mount and metal portion of the shaft and you could get lucky and try and use a breaker bar to flex and bend it back into the proper position ).
(( if the shaft looks ok on a roll test,, it could be the mount and metal portion of the shaft and you could get lucky and try and use a breaker bar to flex and bend it back into the proper position ).
c…
Read Full Q/A … : Briggs & Stratton
When I hold the bar down that engages the blade it will not cut?
ANSWER : Is the blade sharp?
Read Full Q/A … : Briggs & Stratton
