005.
Garden
Experienced gardeners share their insights in answering this question :
This is most likely a ground problem. Remove the ground wire where it goes to the battery terminal and make sure it is clean. Then remove where it bolts to the frame and make sure that end makes contact with bare metal.
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
There may be old or bad fuel in the carburetor float bowl. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and prevent the engine from starting. If the carburetor is clogged, try cleaning it with carburetor cleaner.
On our current style riding mowers, the fuse will either be: A) Under the hood, behind the steering dash panel. B) Underneath and behind the battery, located beneath the seat. Note: The battery may need to be removed for access to this fuse block.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
Fuse location where is the fuse???
ANSWER : BEHIND THE DASH NEAR SWITCH
Cub Cadet zero turn:Engine starts and runs about 5 seconds before blowing 20 amp fuse.
ANSWER : You may have a faulty voltage regualtor that is blowing fuse. Have you tried a fuse that is 5 more amps?
This is a cub cadet zero turn 2007 model
The problem: electronics will not engage.
The unit was mowing and running when I moved to another location and started the mower it started fine.
Unloaded and went to engage the blades but they would not engage. Got off the machine to check things out belts etc. were OK got back on the machine and it wouldn’t start even the hour meter failed to light up.
Battery is fully charged, I can take a screw driver and “jump” the leads at the seleniod and get the engine to turn over, but not start.
I just need to know where to start looking for the problem. I though about hard wiring the safety switches starting with the seat.
ANSWER : Have you tried moving your brake lever around, if it do,s not make contact with the saftey switch nothing will operate
Where is the fuse – Cub Cadet LTX 1042 KW 42" 18HP Kawasaki Lawn Tractor – 13WG93AS010
ANSWER : Behind the dash panel at top of dash there is only one fuse
Where are the fuses on a LT1045 – Cub Cadet Street Sign- tractor lawn riding mower parts
ANSWER : Theuy are behind the dash
How to speed up reverse – Cub Cadet Op's Manual Model Lt1042 Lt1045 Lt1046 Lt1050
ANSWER : Only way is to change pulley size on pump / has built in gear
Engine turns over, but no spark – Cub Cadet Riding Lawn Garden Tractor 25hp Kohler 50"
ANSWER : Hello,
Have you tried changing the spark plug? Then you might consider changing the electronic igniter or the distributor, depending which one your model brings.
Thanks.
2160 cub cadet that wont start.hot spark to the plugs
ANSWER : You’ve solved for some of the equation. Spark. Fuel. Air…..all in the proper sequence. Now, what condition are the plugs ? I’d change them out if they have any wetness to them. Check your fuses as well. Another thing is the ‘safety switches’ – located in seat, on parking brake, etc. One of these could have come undone or gone bad/loose wire. I’m thinking the latter….
