Craftsman

Have changed fuel filter, sprayed out carburetor, tried to run with gas cap off.

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

A Dirty Carburetor Can Cause a Lawnmower To Start Then Die

By far, the most common issue that causes a stalled motor is a dirty carburetor. The carburetor on your engine is the thing that draws in air and mixes it with the fuel.

A clogged carburetor is most commonly caused by leaving fuel in the lawn mower for a long period of time. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and cause the engine to stall.
Loose, Dirty or Disconnected Spark Plug in Your Lawn Mower: Check it out, clean off debris, re-connect and tighten. Dirty Air Filter: Clean or replace. Fuel Not Reaching the Engine: Tap the side of the carburetor to help the flow of gas. If this doesn`t work, you might need a new fuel filter.
If your lawn mower starts, runs for a while, then dies, check the ignition coil, gas cap, and spark plug. One or more of these parts could be causing your problem. Follow our repair and symptom guide to help you fix this.
A dirty carburetor is the most common cause of a lawn mower that starts and then dies. Other possible causes include: Stale/Dirty Gas. Faulty Choke.
Whenever the blade is engaged, it rotates on a crankshaft to cut the grass. But if there is interference in this rotation, the engine can overload and shut off or lose power. Check the crankshaft connection to see if it rotates freely. Inspect the connecting hardware for damage or rust.
The spark plugs are worn or damaged

If you find that your lawnmower keeps dying, or keeps stalling while cutting grass, then inspect the spark plugs. Look for signs of damage or wear. Something as simple as a cracked porcelain insulator can mean an electrode has been damaged or burned away.

Use Carburetor Cleaner

Fortunately, you can generally do this without even taking the carburetor out of the engine. Start by purchasing some commercial lawnmower carburetor cleanerOpens a new window, which comes in a simple spray can and will make it easy to clean the inside and outside of the carb.

The most common cause of a mower that runs for thirty minutes and then dies is a faulty armature. A faulty gas cap is the second most likely cause.
In the case of a riding lawnmower, it could take a lot longer for the starter motor to turn the engine over, which could also start to tax it or even affect the life of the battery. A badly degraded or deformed spark plug could cause the lawnmower`s engine to stall.
There are five common reasons why your lawn mower runs good until warmed up: A problem with the carburetor, gas, oil, cooling, and vapor lock. While it is normal for your lawn mower to heat up, it is not normal for it to stop running.
Why Does Your Lawn Mower Only Run With Choke On? Your lawn mower only runs with choke on because of a problem with the engine fuel-air mixture system, which can be caused by the carburetor, bad fuel, or air leaks. The choke compels more fuel in the combustion chamber to help the engine to turn over when cold.
The spark plugs are worn or damaged

If you find that your lawnmower keeps dying, or keeps stalling while cutting grass, then inspect the spark plugs. Look for signs of damage or wear. Something as simple as a cracked porcelain insulator can mean an electrode has been damaged or burned away.

Your lawn mower runs for 30 minutes then dies if you are having issues such as a bad spark plug, air problems, a malfunctioning carburetor, or a faulty gas cap. You may even encounter the issue that your lawn mower runs for 5 minutes then dies.
Use Carburetor Cleaner

Fortunately, you can generally do this without even taking the carburetor out of the engine. Start by purchasing some commercial lawnmower carburetor cleanerOpens a new window, which comes in a simple spray can and will make it easy to clean the inside and outside of the carb.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

My mower is about 2 months old. Haven’t had any issues until last night. I think I ran out of gas (maybe not, it was getting dark). I filled it up, and won’t stay running. Barely starts unless it is tilted way back (like handle on the ground all the way back), then it runs like a champ. If it is level, it will barely run until it dies. This is on concrete, and there is nothing underneath.
ANSWER : Hello,It sounds like there is sediment in the carb bowl. Remove the gas line from the carb and plug the line with a phillips head screwdriver. Remove the bolt in the bottom of the bowl and carefully tap on the bowl to loosen it without damaging the rubber gasket. Clean the bowl, and blow the ports in the bolt out. Raise and lower the float inside the bowl space to make sure that it is working freely. Re-assemble making sure to seat the rubber gasket properly. If there is sediment in the bowl, you might also consider an inexpensive in-line gas filter ($6 at Lowe’s, etc.).Best regards,–W/D–

Read Full Q/A … : Craftsman

Why gas toro weedeater wont stay running – Ryobi 30 Cubic Centimeter Curved Shaft Gas Trimmer
ANSWER : The diaphragm in the carburettor is worn out.

Read Full Q/A … : Craftsman

I have a craftsman LT1000 and it will run for about 20 min and die like it isn’t getting gas,but it start right back up and die in 1 or 2 min.i changed coil,air filter fuel filter and seat switch,and solenoid.
ANSWER : Try cleaning your gas cap vent. It sounds like it may be partially plugged. If it is plugged, the engine will eventually stall.
Regards!, –W/D–

Read Full Q/A … : Craftsman

What size belt is required for my 19.5 hp craftsman LT1000 42″ mower deck
ANSWER : Deck Belt Part #144959. Thet belt is 1/2 wide by 11/32 thick by 95.25 long. Sears Parts Direct lists it for $34.99 + Shipping..

Read Full Q/A … : Craftsman

Blower won’t start
ANSWER : Do you have spark?is the gas 30 days or newer ?

Read Full Q/A … : Craftsman

Weed eater starts but won't stay running – Weedeater 19 in 25cc Gas Hedge Trimmer
ANSWER : Probably “gum” and “varnish” build-up clogging the TINY passages [called ‘galleries”] inside the carb!

Read Full Q/A … : Craftsman

Starts but does not stay running – Craftsman Gas Mini – Tiller/Edger
ANSWER : Sounds like you will need to clean your carburetor.
Sometimes you can get by with priming it a few times, and letting it run a few times like that and it will flush the gunk out of the jets,but most of the time you will need to rebuild the carburetor.If the mower is over a couple years old, then I also recommend that youbuy and install a new carburetor repair kit, because the diaphragm willget hard and that will cause it to be hard to crank.When you clean your carburetor and remove the jet screws, count the number of turns it takes to seat the jets from their original position.That way when you go to put the jets back in, you know how many turnsthey were in/out.Please rate me, ThanksGood Luck, I hope this helped

Read Full Q/A … : Craftsman

Looking for a side discharge cover for the craftsman lt1000 model 971271813
ANSWER : Searspartsdirect.com

Read Full Q/A … : Craftsman