22″ Yard Machine Push Mower

When I put my self proplled lawn mower up for the winter, everything was fine. This year when I started to mow, it started fine, but would not go forward. The rear wheels initially were locked and would not turn. I finally got them to turn but it was very difficult to push. I finally got my front yard mowed but I was pooped out.

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Set the cutting height to the correct position

One of the reasons for the lawn mower being hard to push is a low cutting height. In this case, the housing or the cutting blade is dragged through heavy grass.

There may be old or bad fuel in the carburetor float bowl. Over time, some of the ingredients in the fuel may evaporate, leaving behind a thicker, stickier substance. This sticky fuel can clog up the carburetor and make the engine hard to start. If the carburetor is clogged, try cleaning it with carburetor cleaner.
Loose, Dirty or Disconnected Spark Plug in Your Lawn Mower: Check it out, clean off debris, re-connect and tighten. Dirty Air Filter: Clean or replace. Fuel Not Reaching the Engine: Tap the side of the carburetor to help the flow of gas. If this doesn`t work, you might need a new fuel filter.
Some of the B&S auto choke carburetors tend to supply too much fuel to the cylinder when hot starting; this floods the spark plug, causing a no start. They have since modified the carburetor. So if you have an auto choke, Briggs, with the hot start problem, go ahead and swap out the carburetor.
The problem may be in the recoil starter itself. A tangled coil of rope or a broken spring may be the problem. In many cases the recoil starter is easily replaced as a single assembly. DO NOT attempt do take the starter apart.
Try replacing the fuel filter; a clogged one will make the mower run sluggishly. Alternatively, check the spark plug. A spark plug that`s outlived its usefulness can cause a sluggish start. Pull the spark plug out, clean it off and reinstall it in the mower.
Operating a manual lawn mower takes some effort, and you may be operating it more often, so make sure you`re up for the exercise. While they don`t require as much maintenance as a gas-powered model, these mowers do require maintenance to provide a good cut.
In most lawnmowers, the fuel filter is located inside the fuel tank or the fuel line. Some lawnmower engines have internal, non-replaceable filters. If you are not sure where your fuel filter is located, you can refer to your lawn mower`s manual.
Operating a manual lawn mower takes some effort, and you may be operating it more often, so make sure you`re up for the exercise. While they don`t require as much maintenance as a gas-powered model, these mowers do require maintenance to provide a good cut.
Check the drive control cable when your lawn mower won`t move because the drive cable can stretch over time. Replace the control cable if it`s damaged. A worn or broken drive belt will also prevent the mower from moving so check the belt next. Adjust the drive belt or replace it if it`s broken.
Inspect the V-belt for damage and replace it with a new one if necessary. Damaged control cable – A broken, or misadjusted, control cable will prevent the mower from self-propelling as well. If the cable is intact but doesn`t move freely, you can try applying a small amount of lubrication to the cable.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

My craftsman dys 4500 26hp 54 – Craftsman 26 hp 54 in. Deck Deluxe Yard Tractor – CA Model
ANSWER : Whats the problem?

Read Full Q/A … : 22″ Yard Machine Push Mower

Craftsman 17 hp model #917.273140, no fire to plug, will run with kill wire off of coil, all operator safety switches ck good.
ANSWER : Have you checked the ignition switch?

Read Full Q/A … : 22″ Yard Machine Push Mower

I have problem with pulles an my craftsman 17 hp 42in
ANSWER : YOU MUST USE SEARS BELTS ! THERE A ODD SIZE

Read Full Q/A … : 22″ Yard Machine Push Mower

917.374050 wont start – Craftsman 675 Torque 190 cc 21" Push Lawn Mower (CA) ()
ANSWER : First check for spark if you do take off the air filter and spray some carb cleaner of starting fluid in the carb and try it if it fires then clean out the carb

Read Full Q/A … : 22″ Yard Machine Push Mower

I need a operating maual for a craftsman riding mower 28990
ANSWER : Sears Manage My Life has the Operator’s Manual: . Click on “Craftsman Lawn, Tractor” to get to the manual page.

Read Full Q/A … : 22″ Yard Machine Push Mower

Is the battery 12 volt? – Craftsman 20 Hp 42" Deck Lawn Tractor
ANSWER : Yes. When you go get a new one try and spend alittle more and get the highest ctanking amp battery you can. Most auto part, walmart, lowes, homedepot or small engine repair stores will carry what you need.

Read Full Q/A … : 22″ Yard Machine Push Mower

Enigine smokes after 15 minutes use, blue smoke
ANSWER : The piston rings are probably worn in the motor.

Read Full Q/A … : 22″ Yard Machine Push Mower

Have a Craftsman 26 hp, 48″ mower…mower starts runs but when I try to engage the blades nothing happens. Checked all the belts, ck for blockage but nothing…what would the next step be?? Tks
ANSWER : When you say nothing happens…is the PTO engaging? You said that you already checked the belts…if none of these are off…you maybe looking at a new PTO clutch.www.nnyparts.com

Read Full Q/A … : 22″ Yard Machine Push Mower