Garden

How to Identify and Fix Common Gardening Problems ?

We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :

Many contemporary Craftsman chain saws are manufactured by Poulan and operate smoothly with a 50:1 fuel-oil mixture.
For a 50:1 ratio of gas to oil, use 2.6 fluid ounces of oil per gallon of gas.
The fuel and oil mixture should always be 2% (50:1).
For a mixing ratio of 1 : 50 you need 5 litres of high-octane gas and 0.10 litres (100 ml) of STIHL two-stroke oil.
Most modern chainsaws, string trimmers, leaf blowers and other small-engine two-stroke equipment recommend a 50:1 oil mix ratio, but some recommend 40:1 and older two-stroke equipment might even call for 32:1.
Running a 2-cycle with the wrong fuel to oil mixture can cause severe damage to your engine. Running the machine without any oil mixed in the fuel can cause severe damage to your equipment within just minutes. This damage is generally very costly to repair and is usually irreparable.
Most modern chainsaws, string trimmers, leaf blowers and other small-engine two-stroke equipment recommend a 50:1 oil mix ratio, but some recommend 40:1 and older two-stroke equipment might even call for 32:1.

Discover Relevant Questions and Answers for Your Specific Issue

the most relevant questions and answers related to your specific issue

Ratio for gas mixture – Husqvarna Craftsman 36cc, 16 In. Gas Chain Saw
ANSWER : The ratio is 40:1. Use good quality 2 stroke oil, preferably Husqvarna, not the type you can get at car service stations as the cheaper oil will cause the engine to wear more quickly.

Read Full Q/A … : Garden

What is gas oil mixture for sears 50 cc chainsaw?
ANSWER : 50/1 Use a good quality oil too.

Read Full Q/A … : Garden

Do I need gas and oil mix – Poulan Super 250a Chainsaw Plate
ANSWER : I think Poulan uses a 40:1 ratio to one gallon of gas, however I have always used 50:1 the same as my sthl saws with no issue. I would rather have more oil mix that to little.

Read Full Q/A … : Garden

Need gas mix solution – Craftsman 25cc 2-Cycle Gas Blower/Vac
ANSWER : Check age of gas. Cannot be more than 30 days old.

Make sure to use fresh gas w/synthetic 2-cycle oil @ 40:1 ratio
(1 gal.) Gas to 3.2 oz. Oil).Do not use old or stale oil/gas mixture. Always
use the proper oil/gas mix. If you do not, your engine will suffer rapid,
permanent damage.

Read Full Q/A … : Garden

Gas to oil mixture for a RY 26540 – Ryobi 30 Cubic Centimeter Curved Shaft Gas Trimmer
ANSWER : 50:1 don’t use outboard motor mix

Read Full Q/A … : Garden

I bought it second hand and it won't start – Husqvarna Craftsman 36cc, 16 In. Gas Chain Saw
ANSWER : Take out the plug, earth the plug to the side of the engine with insulated pliers (otherwisw you will get a shock) switch the on switch on and give it a pull – Look for a strong blue spark from the plug. If it is not the ignision it is the fuel supply. They are a good saw. Good luck!

Read Full Q/A … : Garden

Fuel,gas oil mixture – Echo 30.1CC Chainsaw With a 14 In.bar and Chain
ANSWER : The fuel/oil should be in the ratio 50 to 1

Read Full Q/A … : Garden

Chain sawdies when you give it gas – Husqvarna Craftsman 36cc, 16 In. Gas Chain Saw
ANSWER : Try adjusting the fuel/air mixture. Sounds like it’s too rich.

Read Full Q/A … : Garden