Garden
Just got a ford 145 lawn mower and i need a photo of how to install the deck on the tractor…mainly how the belts are installed
How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
The smooth side of the belt goes on smooth pulleys (as shown on the idler pulley pictured above), while the ribbed side wraps around the grooved pulleys.
Clockwise means that you start at the loop just to the right of the button and end at the loop just to the left, whereas counterclockwise is the other way around. Traditionally in the US, men thread their belts counterclockwise and women thread their belts clockwise.
The “Deck Belt” goes around the pulleys right above the blades on the deck and then to a double pulley. The “Drive Belt” on your mower goes from the transmission, around an Idler pulley then over to the double pulley I mentioned before. The Drive belt also plays a role in making the wheels turn.
The “Deck Belt” goes around the pulleys right above the blades on the deck and then to a double pulley. The “Drive Belt” on your mower goes from the transmission, around an Idler pulley then over to the double pulley I mentioned before. The Drive belt also plays a role in making the wheels turn.
A perfectly tight mower belt can rotate without slipping off but not cause the engine to over-exert and overheat. If the belt does not slip off while working and is not producing unfavorable sounds that indicate wearing off of the belt, then that is the perfect tightness for it.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
ROUTING OF BELT – Mtd Drive Belt 42"
ANSWER : Diagram is on the mowing deckBest regardsCk
Read Full Q/A … : Garden
What size for a 611 deutz allis 42 in deck – Mtd Drive Belt 42"
ANSWER : Go to simpletractors.com they may have the answer for you !
Read Full Q/A … : Garden
Drive belt Have replace drive belt but mower still has no forward movement. Mower is only 2 years old but its already had to have another drive belt installed by the dealer last year. wanted to do it myself but when i install belt theres hardly any tension so mower doesnt move. Checked and rechecked the diagram and is installed correctly. Cant find a tensioner adjustment if it has one.
ANSWER : I don’t have an answer for you, but Do you have a diagram of the Drive Belt?
Read Full Q/A … : Garden
Diagram to install mower deck belt – Troy Bilt 175HP Manual 42" Riding Mower
ANSWER : Need a diagram of how to replace the deck belt.
Read Full Q/A … : Garden
Need diagram of deck belt installation – Craftsman 17.5 hp 42 in. Deck Lawn Tractor – CA Model
ANSWER : May I get the make and model # to get you the right belt diagram
Read Full Q/A … : Garden
Need the mower deck belt size for a allis chalmers t-811 lawn mower
ANSWER : 42″ deck 1/2 x 120 P/N 1668066SM
48″ deck 1/2 x 126 P/N 1703466SM
48″ deck 1/2 x 126 P/N 1703466SM
Read Full Q/A … : Garden
I have a model LTH130 42 inch cut mower and just installed a new elect. clutch and started mowing grass and it began to feel like it was bogging down and I stopped the engine and the belt was very hot. What is going on now?
ANSWER : Hi and welcome to FixYa, I am Kelly
See this link and locate your deck:
http://opebycrigby.tripod.com/decks/jddeck.html
Make sure you have the belt routed correctly. ALSO make sure that you do not have it flipped 180 deg over the idler.
I recommend that you unhook the belt from the mower deck pulleys and try rotating the blades. A bad blade bearing can cause a belt to heat up. Of any of the blades are hard to turn by hand that blade bearing will need to be replaced. Check the idler pulley also.
If after checking the above you continue to experience a problem just respond here and I will help you.
Thanks for choosing FixYa,
Kelly
Read Full Q/A … : Garden
Do I have to remove the mower to replace the secondary drive belt?
ANSWER : Detaching the deck is the best way to do a drive belt, the first time you do the deck can be a mind bender, but you can mark the items place with tape and a pen so it makes it easier to install and or pictures. you can bend the belt guide bars rather than trying to remove them and bend them back into place when the belt is back on
Read Full Q/A … : Garden
