How to Identify and Fix Common Gardening Problems ?
We provide a variety of viewpoints on how to identify and fix common gardening problems. Our sources include academic articles, blog posts, and personal essays from experienced gardeners :
Wipe the trimmer parts down with a rag after use and before storing it. Do a deeper cleaning with a stiff brush and a damp cloth periodically. Use cotton swabs, lightly dampened with machine oil to clean exhausts and intakes and other hard-to-clean areas.
What is the Difference? Lawn edgers are designed to cut edges and create boundary lines, whereas a string trimmer is designed to maintain those boundary lines. They make a great team! Both can help your lawn to look sharper.
Discover Relevant Questions and Answers for Your Specific Issue
the most relevant questions and answers related to your specific issue
The line keeps unwinding! The Worx trimmer seems to unwind the line when ever it decides too! What is the problem?
Hi,The spool can be defective, but it may be just affected by trash in the spool where it mounts to the machine. Look at this tip. There is a place at the end of it that explains how to clean and lubricate the spool. If you cannot fix the problem with this tip, replacement is probably your best option. Try it first.http://www.fixya.com/support/r2827867-winding_line_trimmersBest regards, –W/D–
Battery not charging. Light on charger is red for charge…it’s plugged in properly?????
My battery wont keep a charge – Worx 10" 18v 2 In 1 Grass Trimmer/In Line Edger
Find a plug that can connect from the charger into the trimmer. Basically make it corded.
It will be easier. I can’t find a male ans female plug that would fit. If you find one do let me know.
My worx 24volt mower just about stopped. the batter says its full charged (all green lights) but it barely spins. also the battery is really really hot. Almost too hot to touch it.
The battery is overheating and is shutting down as a safety measure. If allowed to continue overheating, you risk it becoming a fire hazard.You will need to replace the battery and dispose of this one accordingly.
Worx manuals how to change cutting diameter
It’s probably not a good idea to do that – the manufacturer designed it to cut 10″, and it probably works much better at 10″ than at any other diameter.
My worx will not stay charged… the charger goes green after about
10 minutes and only runs for about 5 minutes…
It sounds like the battery has seen better days. a battery will get a “memory” and after while it could fully charged as far as the charger know but only hold a little charge. with the advices in batteries they shouldn’t do this but they all do wear out of time. I would get a new battery, and everything should be just fine. With the any new rechargeable battery you want to make sure that you charge it completely and drain it the whole way before recharging. Best of luckMark
How do you fix a battery problem with my lawn mower because it wont start but it is charged
I think the motor brushes are warn out and need replacing.
The battery on my Worx GT doesn’t seem to hold it’s charge. I have actually taken it directly off the charger when the light is green and it doesn’t have full power. Sometimes it does. The unit is 3 years old. Is this a normal life expectancy for the battery?
The first time the Worx GT worked great since then I took it off the charger and it won’t go more than five min. without going dead. I’m back using my gas trimmer what’s up ith th battery on the Worx Gt